Help with macro for spot funtion.
Locked
 
|
Good morning all, I am in the process of programing macros to my K-pod. I have been successful with all but the spot macro. According to the Elecraft K3 and KX3 programmers rev E11 on page 22 I am to enter an open and closed single quotation with a period in the middle. Funny thing is I can't seem to find the single quotations on the keyboard?
Help Mike VE3WDM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
Single quote is to the left of the 1 key `
Ken At 06:50 AM 12/29/2016, Mike Weir wrote: >Good morning all, I am in the process of programing macros to my >K-pod. I have been successful with all but the spot macro. According >to the Elecraft K3 and KX3 programmers rev E11 on page 22 I am to >enter an open and closed single quotation with a period in the >middle. Funny thing is I can't seem to find the single quotations on >the keyboard? > >Help > >Mike > >VE3WDM >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[hidden email] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to [hidden email] ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net "We don't just make 'em. We use 'em!" ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: Help with macro for spot funtion.
|
|
In reply to this post by VE3WDM
Hi Mike,
You might check the latest programmers manual Rev F8. I don't see anything in that like you indicate. Fred KE7X ________________________________ From: Elecraft <[hidden email]> on behalf of Mike Weir <[hidden email]> Sent: Thursday, December 29, 2016 7:50 AM To: [hidden email] Subject: [Elecraft] Help with macro for spot funtion. Good morning all, I am in the process of programing macros to my K-pod. I have been successful with all but the spot macro. According to the Elecraft K3 and KX3 programmers rev E11 on page 22 I am to enter an open and closed single quotation with a period in the middle. Funny thing is I can't seem to find the single quotations on the keyboard? Help Mike VE3WDM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: Help with macro for spot funtion.
|
|
In reply to this post by VE3WDM
It refers to the dot on the K2 SPOT key. The other parenthesized characters refer to numerals on the same “keypad” on the front of the K3. The . is left of the CWT/0 key.
— Marc W8SDG > On Dec 29, 2016, at 11:12 AM, Ken Arck <[hidden email]> wrote: > > Single quote is to the left of the 1 key ` > > Ken > > > At 06:50 AM 12/29/2016, Mike Weir wrote: >> Good morning all, I am in the process of programing macros to my K-pod. I have been successful with all but the spot macro. According to the Elecraft K3 and KX3 programmers rev E11 on page 22 I am to enter an open and closed single quotation with a period in the middle. Funny thing is I can't seem to find the single quotations on the keyboard? >> >> Help >> >> Mike >> >> VE3WDM >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] <mailto:[hidden email]> > > ------------------------------------------------------------------------------ > President and CTO - Arcom Communications > Makers of repeater controllers and accessories. > http://www.arcomcontrollers.com/ <http://www.arcomcontrollers.com/> > Authorized Dealers for Kenwood and Telewave and > we offer complete repeater packages! > AH6LE/R - IRLP Node 3000 > http://www.irlp.net <http://www.irlp.net/> > "We don't just make 'em. We use 'em!" > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft> > Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> > Post: mailto:[hidden email] <mailto:[hidden email]> > > This list hosted by: http://www.qsl.net <http://www.qsl.net/> > Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html> > Message delivered to [hidden email] <mailto:[hidden email]> Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: Help with macro for spot funtion.
|
|
Sorry, K3, not K2.
> On Dec 29, 2016, at 2:36 PM, Marc Veeneman <[hidden email]> wrote: > > It refers to the dot on the K2 SPOT key. The other parenthesized characters refer to numerals on the same “keypad” on the front of the K3. The . is left of the CWT/0 key. > — > Marc W8SDG > >> On Dec 29, 2016, at 11:12 AM, Ken Arck <[hidden email] <mailto:[hidden email]>> wrote: >> >> Single quote is to the left of the 1 key ` >> >> Ken >> >> >> At 06:50 AM 12/29/2016, Mike Weir wrote: >>> Good morning all, I am in the process of programing macros to my K-pod. I have been successful with all but the spot macro. According to the Elecraft K3 and KX3 programmers rev E11 on page 22 I am to enter an open and closed single quotation with a period in the middle. Funny thing is I can't seem to find the single quotations on the keyboard? >>> >>> Help >>> >>> Mike >>> >>> VE3WDM >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft> >>> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> >>> Post: mailto:[hidden email] <mailto:[hidden email]> >>> >>> This list hosted by: http://www.qsl.net <http://www.qsl.net/> >>> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html> >>> Message delivered to [hidden email] <mailto:[hidden email]> >> >> ------------------------------------------------------------------------------ >> President and CTO - Arcom Communications >> Makers of repeater controllers and accessories. >> http://www.arcomcontrollers.com/ <http://www.arcomcontrollers.com/> >> Authorized Dealers for Kenwood and Telewave and >> we offer complete repeater packages! >> AH6LE/R - IRLP Node 3000 >> http://www.irlp.net <http://www.irlp.net/> >> "We don't just make 'em. We use 'em!" >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft> >> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> >> Post: mailto:[hidden email] <mailto:[hidden email]> >> >> This list hosted by: http://www.qsl.net <http://www.qsl.net/> >> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html> >> Message delivered to [hidden email] <mailto:[hidden email]> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: Help with macro for spot funtion.
|
|
In reply to this post by VE3WDM
You want SWT42; As per the manual :Numeric keypad switches (0-9, ‘.’, ‘<-’) are shown in parentheses. From: Mike Weir <[hidden email]> To: "[hidden email]" <[hidden email]> Sent: Thursday, December 29, 2016 9:50 AM Subject: [Elecraft] Help with macro for spot funtion. Good morning all, I am in the process of programing macros to my K-pod. I have been successful with all but the spot macro. According to the Elecraft K3 and KX3 programmers rev E11 on page 22 I am to enter an open and closed single quotation with a period in the middle. Funny thing is I can't seem to find the single quotations on the keyboard? Help Mike VE3WDM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
Re: Help with macro for spot funtion.
|
|
In reply to this post by VE3WDM
Mike,
The code for the SPOT function is SWT42. I use it with my K3s in CW and CWT function turned on. Also, I find that to work best, make sure your FINE tuning shows all of the decimals in the LCD screen. I hope this helps, Happy New Year to all, Irwin, KD3TB On Thu, Dec 29, 2016 at 9:51 AM Mike Weir <[hidden email]> wrote: > Good morning all, I am in the process of programing macros to my K-pod. I > have been successful with all but the spot macro. According to the Elecraft > K3 and KX3 programmers rev E11 on page 22 I am to enter an open and closed > single quotation with a period in the middle. Funny thing is I can't seem > to find the single quotations on the keyboard? > > > > Help > > > > Mike > > > > VE3WDM > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[hidden email] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [hidden email] > > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |