How to make the KX3 controlled by logging sofftware like N1MM??

[Jim Rodenkirch]

CONTENTS DELETED

The author has deleted this message.

[Jim Rodenkirch]

CONTENTS DELETED

The author has deleted this message.

[Jim Rodenkirch]

CONTENTS DELETED

The author has deleted this message.

[Don Wilhelm-4]

James,

The KX3 comes with the KXUSBa cable (USB to 3.5mm plug).
When connected to a computer, that cable will be assigned a virtual
serial port by the computer - just like any other USB to serial device.
Plug that cable into the KX3 (or the PX3 if you have it) and tell
whatever software application you are using to use whichever COM port
has been assigned by the computer.  No other things should be needed.

73,
Don W3FPR

On 11/30/2015 12:40 PM, James Rodenkirch wrote:
> How do you control the KX3 with N1MM???
>
>
> Do I need another device like this SUCCI??  http://www.kotarov.com/projects/succi
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim Brown-10]

On Mon,11/30/2015 9:40 AM, James Rodenkirch wrote:
> How do you control the KX3 with N1MM???

RS232 cable from computer to KX3. Most of us use the Elecraft USB to
RS232 adapter. This should work with any software that knows the
Elecraft command library.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob N3MNT]

The KX3 interfaces seamlessly with N1MM+ for both logging and sending CW memory locations. It tracks freq and band and mode.  

[Jim Rodenkirch]

CONTENTS DELETED

The author has deleted this message.

[Jim Rodenkirch]

CONTENTS DELETED

The author has deleted this message.

[Bob N3MNT]

Edit the short cut button in N1MM as follows to key radio.

Right click on button
edit then save.

This will make F8 key key KX3 and send Bob
F8,{CATA1ASC KY BOB;}

I am keying radio from N1MM+ with just USB cable

[Ignacy]

Bob N3MNT wrote

Edit the short cut button in N1MM as follows to key radio.

Right click on button
edit then save.

This will make F8 key key KX3 and send Bob
F8,{CATA1ASC KY BOB;}

I am keying radio from N1MM+ with just USB cable

Can one put macro inside for callsign?

Ignacy

[Jim Rodenkirch]

CONTENTS DELETED

The author has deleted this message.