Identifying C26 on K2 100w PA

[Gary G7USC]

Hi All,
I need a bit of help identifying C26. Can any one tell me what markings are on the above capacitor ?
I have a possibility of two that it could be, just not 100% sure which one of the two
73 Gary G7USC

Sent from my iPhone
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Gary,

C26 is normally a disc ceramic capacitor.  The other 33pF capacitor is
also marked 1kV and must be used in the low pass filter area.

73,
Don W3FPR

On 10/24/2013 12:34 PM, Gary McKelvie wrote:
> Hi All,
> I need a bit of help identifying C26. Can any one tell me what markings are on the above capacitor ?
> I have a possibility of two that it could be, just not 100% sure which one of the two
> 73 Gary G7USC
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Lou Voerman W2ROW]

Gary,

In the KPA100 I just finished building C26 was a light brown ceramic disc. It was marked with "CO" above and "33" below. The higher voltage cap of the same value (C5F) was blue and a bit larger. YMMV.

Lou  W2ROW  

Gary G7USC wrote

Hi All,
I need a bit of help identifying C26. Can any one tell me what markings are on the above capacitor ?
I have a possibility of two that it could be, just not 100% sure which one of the two
73 Gary G7USC