K-3 Interface to Ameritron ARI-500

[Robert Dorchuck]

Does anyone use the Ameritron ARI-500 with the K-3?

Thanks
Bob W6VY

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Phil Salas]

"Does anyone use the Ameritron ARI-500 with the K-3?  Thanks Bob W6VY"

Yes, I've used the ARI-500 with both the current ALS-600 and the new
ALS-1300.  It works exactly like the Yaesu band data interface.  HOWEVER -
you must have the TTL band data modification in the K3.

Phil - AD5X

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jim HaRRIS]

Bob,

I use the ARI-500 with my K3 and ALS-500M amp.  The pull up resistor mod is incorporated in later K3's.  I home brewed a "Y" connector from the ACC jack on the K3 to the ARI-500.  The other leg goes to a com port on my computer for FSK RTTY.  Be sure to set up the ARI-500 exactly per the manual.  No problems at all.....functions as designed.

73,

Jim, W0EM