Elecraft

K-3 rig interface for N3FJP

Classic

List

Threaded

5 messages Options

gmuller885

K-3 rig interface for N3FJP

Good Afternoon:
I am a fairly new ham and new K3 owner. I have decided to try using
the N3FJP logging SW. YES I know there are others out there but this is where
I would like to start. Does any one know the K3 string to read frequency
and mode that goes in the N3FJP rig interface as shown on pg 46 of the N3FJP
manual. I cannot find it in the K3 manual or do not to know what to look
under. Any and all help would be greatly appreciated.

Gerald Muller KF5EYC
[hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Dick Dievendorff-4

Re: K-3 rig interface for N3FJP

Commands are described in the K3 and KX3 Programmer's Reference, available
from our manual page http://www.elecraft.com/K2_Manual_Download_Page.htm#K3

Look for the description of the FA and MD commands. FA; reads the frequency
of VFO A. MD; reads the K3's mode.

73 de Dick, K6KR

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of [hidden email]
Sent: Thursday, December 19, 2013 9:54 AM
To: [hidden email]
Subject: [Elecraft] K-3 rig interface for N3FJP

Good Afternoon:
I am a fairly new ham and new K3 owner. I have decided to try using the
N3FJP logging SW. YES I know there are others out there but this is where I
would like to start. Does any one know the K3 string to read frequency and
mode that goes in the N3FJP rig interface as shown on pg 46 of the N3FJP
manual. I cannot find it in the K3 manual or do not to know what to look
under. Any and all help would be greatly appreciated.

Gerald Muller KF5EYC
[hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Josh Fiden

Re: K-3 rig interface for N3FJP

In reply to this post by gmuller885

Fairly certain I tried this to confirm things were working when I was debugging issues with Writelog. The string was already setup in N3FJP when you select Elecraft as the radio. You shouldn't have to manually enter it.

73,
Josh W6XU

Sent from my Mobira Talkman

> On Dec 19, 2013, at 9:53 AM, [hidden email] wrote:
>
> Good Afternoon:
> I am a fairly new ham and new K3 owner. I have decided to try using
> the N3FJP logging SW. YES I know there are others out there but this is where
> I would like to start. Does any one know the K3 string to read frequency
> and mode that goes in the N3FJP rig interface as shown on pg 46 of the N3FJP
> manual. I cannot find it in the K3 manual or do not to know what to look
> under. Any and all help would be greatly appreciated.
>
> Gerald Muller KF5EYC
> [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Michael Eberle

Re: K-3 rig interface for N3FJP

In reply to this post by gmuller885

Maybe I don't understand your problem, but I don't know why you need the
K3 command strings. You should be able to click on the 'Settings' menu,
then click on 'Rig Interface.' On this screen select Elecraft for the
radio type, select the serial port, baud rate, etc... Then when you
click the 'Test' button it will start polling the radio. If everything
is working correctly, the frequency and mode will come up in the black
boxes.

Mike
KI0HA

On 12/19/2013 11:53, [hidden email] wrote:

> Good Afternoon:
> I am a fairly new ham and new K3 owner. I have decided to try using
> the N3FJP logging SW. YES I know there are others out there but this is where
> I would like to start. Does any one know the K3 string to read frequency
> and mode that goes in the N3FJP rig interface as shown on pg 46 of the N3FJP
> manual. I cannot find it in the K3 manual or do not to know what to look
> under. Any and all help would be greatly appreciated.
>
> Gerald Muller KF5EYC
> [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

NZ0T

Re: K-3 rig interface for N3FJP

I've been using N3FJP AClog with my K3 for over 5 years. Just do as posted above in the settings menu. It's just a matetr of matching the baud rate more than anything else. All the other settings match the K3 defaults and just make sure you have the baud rates matched.

73 Bill NZ0T