K-Line Full break-in

[George Rebong]

I set my K3 to QSK but I don't know how to make it FULL BREAK-IN. Is there
some thing in the MENU how to set it to full break-in?


--
George Rebong
  KE6TE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

George,

If you are talking about CW, set VOX on.

73,
Don W3FPR

On 11/29/2014 4:14 PM, George Rebong wrote:
> I set my K3 to QSK but I don't know how to make it FULL BREAK-IN. Is there
> some thing in the MENU how to set it to full break-in?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[k5oai]

Hold down the QSK side of the [BAND] button
watch the VFO B text
Holding down the QSK side again, toggles between FULL and SIMI break in.
the VFO B text will tell you when it switches,
as well as the QSK text under VBO A's display when you are in FULL

from page 30 in the manual:

<quote>
Hold QSK to select full break-in (QSK icon on) or
semi break-in operation. QSK allows others to
“break” your CW transmission by sending one or
two characters. With semi break-in selected (QSK
off), the K3 returns to receive mode after a time
delay you set using DELAY.
VOX must be turned on in CW mode to enable
both full and semi break-in operation. If PTT is
selected (VOX icon off), transmit must be activated
using PTT or by tapping XMIT . PTT is sometimes
activated using a foot switch.
For ultra-fast CW full break-in at up to 100
WPM, set CONFIG:CW QRQ to ON. If CW
QRQ is OFF, max speed using VOX is 60 WPM,
and PTT is required for 60 to 100 WPM.
<quote>

73 & GB
K5OAI Sam

[Guy Olinger K2AV]

QSK and full break-in mean the same thing. Not full break-in means that you
are holding TX state between bauds. That is what happens when you turn QSK
off. Fast QSK or QRQ QSK (CW QRQ option in CONFIG menu) has to do with
making the TX/RX state flips take so little time that you can hear between
bauds at 70 wpm.

73, Guy K2AV

On Sat, Nov 29, 2014 at 4:14 PM, George Rebong <[hidden email]> wrote:

> I set my K3 to QSK but I don't know how to make it FULL BREAK-IN. Is there
> some thing in the MENU how to set it to full break-in?
>
>
> --
> George Rebong
>   KE6TE
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]