K-Line Programming

[Phil Hystad-3]

Question about programming interface for all the K-Line equipment (including P3 and KAT500)…

Are the published programming commands totally complete?  In other words, is the published interface sufficient to rewrite all functions of the K3/P3/KPA500/KAT500 utility programs including the firmware updates?

73, phil, K7PEH

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[tomb18]

Hi Phil,
While most commands are available in the programming interface, none of the
DSP commands are, neither is there any published means to load the firmware.
Tom

-----Original Message-----
From: Phil Hystad
Sent: Monday, February 16, 2015 11:27 AM
To: Elecraft Reflector
Subject: [Elecraft] K-Line Programming

Question about programming interface for all the K-Line equipment (including
P3 and KAT500)…

Are the published programming commands totally complete?  In other words, is
the published interface sufficient to rewrite all functions of the
K3/P3/KPA500/KAT500 utility programs including the firmware updates?

73, phil, K7PEH

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Phil Hystad-3]

Tom,

Thanks.  I sort of guessed that but I wanted to make sure that there wasn't some source of programming information that I was unaware of.

73, phil, K7PEH

> On Feb 16, 2015, at 9:36 AM, Tom <[hidden email]> wrote:
>
> Hi Phil,
> While most commands are available in the programming interface, none of the DSP commands are, neither is there any published means to load the firmware.
> Tom
>
> -----Original Message----- From: Phil Hystad
> Sent: Monday, February 16, 2015 11:27 AM
> To: Elecraft Reflector
> Subject: [Elecraft] K-Line Programming
>
> Question about programming interface for all the K-Line equipment (including P3 and KAT500)…
>
> Are the published programming commands totally complete?  In other words, is the published interface sufficient to rewrite all functions of the K3/P3/KPA500/KAT500 utility programs including the firmware updates?
>
> 73, phil, K7PEH
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
> ---
> This email is free from viruses and malware because avast! Antivirus protection is active.
> http://www.avast.com
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Nate Bargmann]

As near as I have been able to determine the memory commands for the K3
have never been officially published.

73, Nate

--

"The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://www.n0nb.us
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]