K-POD Macro
Locked
 
|
I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = 15
Mhz. This sends VFO A to 20 Mhz: FA00020000000;MD5;FB00015000000;BW0300; But does not send VFO B to 15 Mhz What am I doing wrong here? Thanks, -- Irwin KD3TB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
You have dual receivers?
On 12/12/2016 3:07 PM, Irwin Darack wrote: > I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = 15 > Mhz. > > This sends VFO A to 20 Mhz: FA00020000000;MD5;FB00015000000;BW0300; > But does not send VFO B to 15 Mhz > > What am I doing wrong here? > > Thanks, ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
In reply to this post by Irwin KD3TB
Irwin,
My guess is that you do not have VFO IND turned ON in the menu. You are trying to set the VFOs to two different bands and that requires VFO INDependent. See page 37 of the K3 manual for full disclosure. 73, Don W3FPR On 12/12/2016 5:07 PM, Irwin Darack wrote: > I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = 15 > Mhz. > > This sends VFO A to 20 Mhz: FA00020000000;MD5;FB00015000000;BW0300; > But does not send VFO B to 15 Mhz > > What am I doing wrong here? > > Thanks, > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
I have had no luck in trying a variety of combinations using the Unlink
VFO, Split and Sub Band commands in the Macro. I know wonder if you can not create a macro that sends VFO A to one band/frequency and VFO B to another band/Frequency? I am hoping that someone from Elecraft who is responsible for the Macro's can help here before I spend too much more time on this project. Thanks, Irwin KD3TB On Mon, Dec 12, 2016 at 6:44 PM, Irwin Darack <[hidden email]> wrote: > > On Mon, Dec 12, 2016 at 5:22 PM Don Wilhelm <[hidden email]> > wrote: > >> Irwin, >> Thanks, Irwin >> >> >> My guess is that you do not have VFO IND turned ON in the menu. >> >> You are trying to set the VFOs to two different bands and that requires >> >> VFO INDependent. See page 37 of the K3 manual for full disclosure. >> >> >> >> 73, >> >> Don W3FPR >> >> >> >> On 12/12/2016 5:07 PM, Irwin Darack wrote: >> >> > I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = >> 15 >> >> > Mhz. >> >> > >> >> > This sends VFO A to 20 Mhz: FA00020000000;MD5;FB00015000000;BW0300; >> >> > But does not send VFO B to 15 Mhz >> >> > >> >> > What am I doing wrong here? >> >> > >> >> > Thanks, >> >> > >> >> -- Irwin KD3TB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
|
As Don points out, you have to have the CONFIG:VFO IND set to yes (independent VFOs) to set different bands on different VFOs.
Cheers and 73, Fred KE7X For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com> (Macro Programming book coming soon) ________________________________ From: Elecraft <[hidden email]> on behalf of Irwin Darack <[hidden email]> Sent: Tuesday, December 13, 2016 9:56 AM To: [hidden email]; [hidden email] Subject: Re: [Elecraft] K-POD Macro I have had no luck in trying a variety of combinations using the Unlink VFO, Split and Sub Band commands in the Macro. I know wonder if you can not create a macro that sends VFO A to one band/frequency and VFO B to another band/Frequency? I am hoping that someone from Elecraft who is responsible for the Macro's can help here before I spend too much more time on this project. Thanks, Irwin KD3TB On Mon, Dec 12, 2016 at 6:44 PM, Irwin Darack <[hidden email]> wrote: > > On Mon, Dec 12, 2016 at 5:22 PM Don Wilhelm <[hidden email]> > wrote: > >> Irwin, >> Thanks, Irwin >> >> >> My guess is that you do not have VFO IND turned ON in the menu. >> >> You are trying to set the VFOs to two different bands and that requires >> >> VFO INDependent. See page 37 of the K3 manual for full disclosure. >> >> >> >> 73, >> >> Don W3FPR >> >> >> >> On 12/12/2016 5:07 PM, Irwin Darack wrote: >> >> > I would like to write a WWV Macro that sends VFO A = 20 Mhz and VFO B = >> 15 >> >> > Mhz. >> >> > >> >> > This sends VFO A to 20 Mhz: FA00020000000;MD5;FB00015000000;BW0300; >> >> > But does not send VFO B to 15 Mhz >> >> > >> >> > What am I doing wrong here? >> >> > >> >> > Thanks, >> >> > >> >> -- Irwin KD3TB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |