Elecraft

K-Pod macros Around?

Classic

List

Threaded

7 messages Options

Gary Smith-2

K-Pod macros Around?

It's time to finally start using the
K-Pod. I had hoped it might control the P3
as well as the K3s but apparently A P3
function not happening yet.

I would though like to assign the
functions of the K3s memories M1-M4 to the
K-Pod and if someone knows of a page with
macros for this & maybe even other nifty
Macro treasures, I'd appreciate a link

Thanks & 73,

Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Gary Smith-2

Re: K-Pod macros Around?

Well thanks! I got the K-Pod a bit ago but
it's been unused because of other
projects. My owner's manual only has 11
pages to it so there have been a lot of
revisions in a short time.

Thanks & 73,

Gary
KA1J

> I believe what you want is in the Rev C K-Pod Owner's Manual on page
> 16. IF you have an older version, you can download the Rev C manual
> here:
>
> http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Manual%20Rev
> %20C.p df
>
> For example, SWT21; will "tap" M1 on the K3, SWT32; will "tap" M2 and
> so on.
>
>
> 73, Ron AC7AC
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of
> Gary Smith Sent: Wednesday, September 28, 2016 3:43 PM To:
> [hidden email] Subject: [Elecraft] K-Pod macros Around?
>
> It's time to finally start using the
> K-Pod. I had hoped it might control the P3 as well as the K3s but
> apparently A P3 function not happening yet.
>
> I would though like to assign the
> functions of the K3s memories M1-M4 to the K-Pod and if someone knows
> of a page with macros for this & maybe even other nifty Macro
> treasures, I'd appreciate a link
>
> Thanks & 73,
>
> Gary
> KA1J
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Gary Smith-2

Re: K-Pod macros Around?

I've been trying to find the info I am
looking for but I must be dumber than a
box of New England boulders.

With the immediate goal of tapping the
K-Pod buttons to do the following:

F3 = M3 (macro SWT35)
F4 = M4 (macro SWT39)
F7 = M1 (macro SWT21)
F8 = M2 (macro SWT31)

I haven't found out how to make the F
buttons fire a specific macro. Some of the
info below was very helpful, such as SWT21
and that helped me figure out more.

But how do I ascribe a button on the K-Pod
top a specific desired macro?

> Well thanks! I got the K-Pod a bit ago but
> it's been unused because of other
> projects. My owner's manual only has 11
> pages to it so there have been a lot of
> revisions in a short time.
>
> Thanks & 73,
>
> Gary
> KA1J
>
> > I believe what you want is in the Rev C K-Pod Owner's Manual on page
> > 16. IF you have an older version, you can download the Rev C manual
> > here:
> >
> > http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Manual%20R
> > ev %20C.p df
> >
> > For example, SWT21; will "tap" M1 on the K3, SWT32; will "tap" M2
> > and so on.
> >
> >
> > 73, Ron AC7AC
> >
> > -----Original Message-----
> > From: Elecraft [mailto:[hidden email]] On Behalf
> > Of Gary Smith Sent: Wednesday, September 28, 2016 3:43 PM To:
> > [hidden email] Subject: [Elecraft] K-Pod macros Around?
> >
> > It's time to finally start using the
> > K-Pod. I had hoped it might control the P3 as well as the K3s but
> > apparently A P3 function not happening yet.
> >
> > I would though like to assign the
> > functions of the K3s memories M1-M4 to the K-Pod and if someone
> > knows of a page with macros for this & maybe even other nifty Macro
> > treasures, I'd appreciate a link
> >
> > Thanks & 73,
> >
> > Gary
> > KA1J
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to [hidden email]
> >
> >
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

Nick Garner

Re: K-Pod macros Around?

In reply to this post by Gary Smith-2

Hi Gary,
A few weeks ago I made this website to help with the creation of macros.

http://pignology.net/emm/

73,
Nick
N3WG

On Wed, Sep 28, 2016 at 3:42 PM, Gary Smith <[hidden email]> wrote:

> It's time to finally start using the
> K-Pod. I had hoped it might control the P3
> as well as the K3s but apparently A P3
> function not happening yet.
>
> I would though like to assign the
> functions of the K3s memories M1-M4 to the
> K-Pod and if someone knows of a page with
> macros for this & maybe even other nifty
> Macro treasures, I'd appreciate a link
>
> Thanks & 73,
>
> Gary
> KA1J
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

Gary Smith-2

Re: K-Pod macros Around?

In reply to this post by Gary Smith-2

Beautiful! That's the Rosetta Stone I
needed; From 9 on down to 16 in the
Command Tester in the Utility:

9 = F1
10 = F2
11 = F3

And so on to

16 - F8

Maybe they will mention that in the next
Rev of the owner's manual.

Thank you all, now I'll have to figure out
the more complex macros and how I might
want to use them but that will come. And
thanks to those who provided links to help
me out as well, I will certainly check
them out.

73,

Gary
KA1J

>
> Gary,
>
> Here are mine as of now:
>
>
>
> 11 and 12 do what you want. 11 is F3 (tap), and 12 is F4
> (tap).
>
> 73, Jim N7US
>
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On
> Behalf Of Gary Smith
> Sent: September 28, 2016 22:41
> To: [hidden email]
> Subject: Re: [Elecraft] K-Pod macros Around?
>
> I've been trying to find the info I am
> looking for but I must be dumber than a box of New England
> boulders.
>
> With the immediate goal of tapping the
> K-Pod buttons to do the following:
>
> F3 = M3 (macro SWT35)
> F4 = M4 (macro SWT39)
> F7 = M1 (macro SWT21)
> F8 = M2 (macro SWT31)
>
> I haven't found out how to make the F
> buttons fire a specific macro. Some of the info below was
> very helpful, such as SWT21 and that helped me figure out
> more.
>
> But how do I ascribe a button on the K-Pod top a specific
> desired macro?
>
> > Well thanks! I got the K-Pod a bit ago but it's been
> unused because of
> > other projects. My owner's manual only has 11 pages to it
> so there
> > have been a lot of revisions in a short time.
> >
> > Thanks & 73,
> >
> > Gary
> > KA1J
> >
> > > I believe what you want is in the Rev C K-Pod Owner's
> Manual on page
> > > 16. IF you have an older version, you can download the
> Rev C manual
> > > here:
> > >
> > >
> http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Ma
> nual%20R
> > > ev %20C.p df
> > >
> > > For example, SWT21; will "tap" M1 on the K3, SWT32; will "tap"
> M2 > > and so on. > > > > > > 73, Ron AC7AC > > > > -----Original
> Message----- > > From: Elecraft
> [mailto:[hidden email]] On Behalf > > Of Gary
> Smith Sent: Wednesday, September 28, 2016 3:43 PM To: > >
> [hidden email] Subject: [Elecraft] K-Pod macros Around?
> > > > > It's time to finally start using the K-Pod. I had hoped it
> might > > control the P3 as well as the K3s but apparently A P3
> function not > > happening yet. > > > > I would though like to
> assign the > > functions of the K3s memories M1-M4 to the K-Pod
> and if someone > > knows of a page with macros for this & maybe
> even other nifty Macro > > treasures, I'd appreciate a link > > >
> > Thanks & 73, > > > > Gary > > KA1J > >
> ____________________________________________________________ __ >
> > Elecraft mailing list > > Home:
> http://mailman.qth.net/mailman/listinfo/elecraft > > Help:
> http://mailman.qth.net/mmfaq.htm > > Post:
> mailto:[hidden email] > > > > This list hosted by:
> http://www.qsl.net Please help support this > > email list:
> http://www.qsl.net/donate.html Message delivered to > >
> [hidden email] > > > > > > > >
> ____________________________________________________________ __ >
> Elecraft mailing list > Home:
> http://mailman.qth.net/mailman/listinfo/elecraft > Help:
> http://mailman.qth.net/mmfaq.htm > Post:
> mailto:[hidden email] > > This list hosted by:
> http://www.qsl.net Please help support this email > list:
> http://www.qsl.net/donate.html Message delivered to >
> [hidden email] >
> ____________________________________________________________ __
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:[hidden email] This list hosted by:
> http://www.qsl.net Please help support this email list:
> http://www.qsl.net/donate.html Message delivered to [hidden email]

NK7Z

Re: K-Pod macros Around?

In reply to this post by Nick Garner

On Wed, 2016-09-28 at 20:53 -0700, Nick Garner wrote:
> Hi Gary,
> A few weeks ago I made this website to help with the creation of
> macros.
>
> http://pignology.net/emm/
>
> 73,
> Nick
> N3WG

That is a pretty cool page Nick... :)
--
73's, and thanks,
Dave (NK7Z)
For software/hardware reviews see:
http://www.nk7z.net

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Don Wilhelm

Re: K-Pod macros Around?

In reply to this post by Gary Smith-2

Gary and all,

The K-Pod buttons activate macros 1 thru 16.
For instance, a hold of the F1 button activates Macro 1 and a tap
activates Macro 9.

So you create a Macro for those macro numbers. It is a subtle point,
but you do not assign the K-Pod buttons to any random macro, that is
pre-assigned. Place the desired macro into the proper numbered slot in
the K3.

73,
Don W3FPR

On 9/28/2016 11:41 PM, Gary Smith wrote:
> But how do I ascribe a button on the K-Pod
> top a specific desired macro?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]