K1-2040

[Ruchan Ozatay]

Hi all,

I am now building RF Boar, Part I. I have to install ceramic trimmer capacitors (C13 and C20). The flattened side must be oriented towards the flattened side of the component outline, but the outline on my board is not clear enough.

Can some one help me to find which side of the component outline is flattened?

Thank you in advance.
73, Ruchan Ozatay, TA2AH
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bill Hammond]

Strange, I am at the same point (SN 2033) and have the same question.   The
outline on the circuit board for C13 and C20 does not have a flat side I can  
see.  Any one have the top cover of the K1 off ?
Bill
AK5X
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Erik Linder]

[hidden email] wrote:
> Strange, I am at the same point (SN 2033) and have the same question.   The
> outline on the circuit board for C13 and C20 does not have a flat side I can  
> see.  Any one have the top cover of the K1 off ?

Look at Appendix F in the manual.
In my manual the flat side of C13 and C20 is pointing to the back edge
of the board.

But to be on the safe side, look in your own manuals.

73 de SM0RVV ./Erik
K1 #1978
K2 #4904
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bill Hammond]

Eric,
Appendix F, great I see it now...don't know why I didn't think of  that.  
Thanks, 72/73, Bill AK5X
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Ruchan,

The flat side is clearly shown in the manual Appendix F - the Parts
Placement diagram, and that is the best way I can communicate the proper
instructions.

73,
Don W3FPR

> -----Original Message-----
>
> I am now building RF Boar, Part I. I have to install ceramic
> trimmer capacitors (C13 and C20). The flattened side must be
> oriented towards the flattened side of the component outline, but
> the outline on my board is not clear enough.
>
> Can some one help me to find which side of the component outline
> is flattened?
>
> Thank you in advance.
> 73, Ruchan Ozatay, TA2AH
>

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.9 - Release Date: 6/11/2005

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com