K1-4, S/N. 3206

[Scotty Long]

I changed out the headphone jack now the speaker is working again thank you.

What voltage am I looking for at TP1 SWR bridge adjustment??? mV - V? On the KAT1.

T1 is wound correctly.

 Relays all soldered.

Thank you,

Scotty/NU0S

Sent from my Verizon Wireless 4G LTE DROID
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Scotty,

You should be looking for the lowest voltage available - if it in not in
the low millivolt range, (less than 10 mV) you have some problem.  The
most common cause of problems is T1.  Inadequately stripped and tinned
toroid leads, leads in the wrong holes, the toroid wound in the wrong
sense.  T1 must look *exactly* like the diagram in the manual.

73,
Don W3FPR


On 10/9/2013 8:19 PM, Scotty Long wrote:
> I changed out the headphone jack now the speaker is working again thank you.
>
> What voltage am I looking for at TP1 SWR bridge adjustment??? mV - V? On the KAT1.
>
> T1 is wound correctly.
>
>   Relays all soldered.
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Scotty Long]

Hey I got the ATU figured out.  My bad as the kids say. I did not exit the menu when taking the tests. All the options are installed now.  Now off to make more QSO's. Ready for  pbmme polar bear QRP weekend. Grrrrrrr...

73-Scotty-NU0S

Sent from my Verizon Wireless 4G LTE DROID

Scotty Long <[hidden email]> wrote:

I changed out the headphone jack now the speaker is working again thank you.

What voltage am I looking for at TP1 SWR bridge adjustment??? mV - V? On the KAT1.

T1 is wound correctly.

 Relays all soldered.

Thank you,

Scotty/NU0S

Sent from my Verizon Wireless 4G LTE DROID
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html