Elecraft

K1 Power jack size ?

Classic

List

Threaded

5 messages Options

daleputnam

K1 Power jack size ?

E620026 is the part number for the hole-through PCB mounted power plug for the K1.
What is the outside size of that jack? the inside is 2.1mm.

I am planning to build a test jig for the K1 for the lab.

Thankyou,

Have a great day,

--... ...--
Dale - WC7S in Wy

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

daleputnam

Re: K1 Power jack size ?

the outside contact size is what is being asked..
Mouser has a list of assortments.
Thankyou.

Have a great day,

--... ...--
Dale - WC7S in Wy

From: [hidden email]
To: [hidden email]
Subject: K1 Power jack size ?
Date: Fri, 9 Oct 2015 13:45:04 -0600

E620026 is the part number for the hole-through PCB mounted power plug for the K1.
What is the outside size of that jack? the inside is 2.1mm.

I am planning to build a test jig for the K1 for the lab.

Thankyou,

Have a great day,

--... ...--
Dale - WC7S in Wy

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Brian Hunt

Re: K1 Power jack size ?

Outside of the jack (hole) size is 6.50 +/- 0.04 mm diameter measured.
Hole has a little springy contact that will accommodate a smaller plug.
OD contact size of the plug is 5.50 +/- 0.02 mm measured.

Yeah, it's really confusing.

Brian, K0DTJ

On 10/9/2015 12:47, Dale Putnam wrote:

> the outside contact size is what is being asked..
> Mouser has a list of assortments.
> Thankyou.
>
> Have a great day,
>
>
> --... ...--
> Dale - WC7S in Wy
>
>
>
>
> From: [hidden email]
> To: [hidden email]
> Subject: K1 Power jack size ?
> Date: Fri, 9 Oct 2015 13:45:04 -0600
>
>
>
>
> E620026 is the part number for the hole-through PCB mounted power plug for the K1.
> What is the outside size of that jack? the inside is 2.1mm.
>
> I am planning to build a test jig for the K1 for the lab.
>
> Thankyou,
>
> Have a great day,
>
>
> --... ...--
> Dale - WC7S in Wy
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Josh Fiden

Re: K1 Power jack size ?

In reply to this post by daleputnam

Almost certainly 5.5mm. I don't have one, but 5.5x2.1 is by far the most common DC power jack.

73
Josh W6XU

Sent from my mobile device

> On Oct 9, 2015, at 12:45 PM, Dale Putnam <[hidden email]> wrote:
>
> E620026 is the part number for the hole-through PCB mounted power plug for the K1.
> What is the outside size of that jack? the inside is 2.1mm.
>
> I am planning to build a test jig for the K1 for the lab.
>
> Thankyou,
>
> Have a great day,
>
>
> --... ...--
> Dale - WC7S in Wy
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

daleputnam

Re: K1 Power jack size ?

Thank you Josh, and Brian, and all the rest for the fast answers.
Very helpful, you guys and this list!!

Have a great day,

--... ...--
Dale - WC7S in Wy

> Subject: Re: [Elecraft] K1 Power jack size ?
> From: [hidden email]
> Date: Fri, 9 Oct 2015 17:43:17 -0700
> CC: [hidden email]
> To: [hidden email]
>
> Almost certainly 5.5mm. I don't have one, but 5.5x2.1 is by far the most common DC power jack.
>
> 73
> Josh W6XU
>
> Sent from my mobile device
>
> > On Oct 9, 2015, at 12:45 PM, Dale Putnam <[hidden email]> wrote:
> >
> > E620026 is the part number for the hole-through PCB mounted power plug for the K1.
> > What is the outside size of that jack? the inside is 2.1mm.
> >
> > I am planning to build a test jig for the K1 for the lab.
> >
> > Thankyou,
> >
> > Have a great day,
> >
> >
> > --... ...--
> > Dale - WC7S in Wy
> >
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to [hidden email]