K1: noise blanker instructions theory

[Stephen Prior]

This is reposted, since I never saw it appear on the list, apologies if it's
a dupe.

AnywayŠŠŠŠ..


I'm just about to build the K1 noise blanker to take my mind off the KX3!
 
In the errata sheet, I am confused by the change to the bottom of page 5:
'If your board is revision C, solder .........'
 
I have looked at the print on the pcb and it says Rev. Cr
 
Is that revsion C or not I wonder?  I know it's not A or C, but to my mind
Cr does not equal C!
 
Thanks
 
Stephen G4SJP
 
PS.  To UK readers of this, I ordered the kit from QRP project in Germany
and paid less than I would have done direct from Elecraft once the shipping
was taken into consideration.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Stephen Prior]

I really don't know where the word 'theory' came from in the subject!

On 17/12/2011 20:02, "Stephen  Prior" <[hidden email]> wrote:

>This is reposted, since I never saw it appear on the list, apologies if
>it's
>a dupe.
>
>Anyway????..
>
>
>I'm just about to build the K1 noise blanker to take my mind off the KX3!
>
>In the errata sheet, I am confused by the change to the bottom of page 5:
>'If your board is revision C, solder .........'
>
>I have looked at the print on the pcb and it says Rev. Cr
>
>Is that revsion C or not I wonder?  I know it's not A or C, but to my mind
>Cr does not equal C!
>
>Thanks
>
>Stephen G4SJP
>
>PS.  To UK readers of this, I ordered the kit from QRP project in Germany
>and paid less than I would have done direct from Elecraft once the
>shipping
>was taken into consideration.
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Stephen,

Is there a place for C12 and C13 on the top of the board? If not, place
them on the bottom as shown in the instructions for the Rev C board.

73,
Don W3FPR

On 12/17/2011 3:02 PM, Stephen Prior wrote:

> This is reposted, since I never saw it appear on the list, apologies if it's
> a dupe.
>
> AnywayŠŠŠŠ..
>
>
> I'm just about to build the K1 noise blanker to take my mind off the KX3!
>
> In the errata sheet, I am confused by the change to the bottom of page 5:
> 'If your board is revision C, solder .........'
>
> I have looked at the print on the pcb and it says Rev. Cr
>
> Is that revsion C or not I wonder?  I know it's not A or C, but to my mind
> Cr does not equal C!
>
> Thanks
>
> Stephen G4SJP
>
> PS.  To UK readers of this, I ordered the kit from QRP project in Germany
> and paid less than I would have done direct from Elecraft once the shipping
> was taken into consideration.
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ny4g]

Elecrafters
Looking for support tomorrow in the ARRL Rookie Roundup
Look for my calling CQ around the following frequencies tomorrow
CW: 3.550, 7.050, 14,050, 21.050, 28.050 and between 50.080 and 50.100 MHz.
My last year to qualify as a rookie having been licensed in 2009
I'll be firing up the K2/100  - look forward to hearing y'all
DE NY4G ARIEL 09 SC


     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html