K2/100 RS-232 Problem & Logger 32

[Bob Wehking]

I completed the KPA100 & everything works except I can't get the K2 to communicate with Logger32. I setup the radio for COM1, 4800 baud, 2 stop bits, no parity. Kenwood-all & have toggled both DTR & RTS on & off. The cable is wired correctly based on the manual. I've checked all the solder joints on the amplifier board associated with U4 & they all look good. I also checked the resistance of all RF chokes associated with U4.

My Icom 756Pro works fine with  Logger 32
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Vic K2VCO]

Bob Wehking wrote:
> I completed the KPA100 & everything works except I can't get the K2
> to communicate with Logger32. I setup the radio for COM1, 4800 baud,
> 2 stop bits, no parity. Kenwood-all & have toggled both DTR & RTS on
> & off. The cable is wired correctly based on the manual. I've checked
> all the solder joints on the amplifier board associated with U4 &
> they all look good. I also checked the resistance of all RF chokes
> associated with U4.

Just in case you've missed the obvious, I note that you don't mention
setting PORT to ON in the K2 menu.

--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Brian Mury-3]

On Thu, 2005-09-22 at 08:45 -0400, Bob Wehking wrote:
> I completed the KPA100 & everything works except I can't get the K2 to
> communicate with Logger32. I setup the radio for COM1, 4800 baud, 2
> stop bits, no parity. Kenwood-all & have toggled both DTR & RTS on &
> off. The cable is wired correctly based on the manual. I've checked
> all the solder joints on the amplifier board associated with U4 & they
> all look good. I also checked the resistance of all RF chokes
> associated with U4.

My K2/100 works fine with Logger32. My settings are the same as yours (I
have DTR and RTS unchecked).

Have you tried turning on the "Show Radio Debug Window" option and see
what's being sent and received?

Have you tried using the K2 with a different program? You could try it
with a simple terminal program and type the commands manually.

Have you turned PORT on in the K2's secondary menu?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com