K2 Digital Interface v.ll.2

[Barry Middleton]

Is it possible to obtain a kit for this interface, I would prefer to
purchase from the EU but also the USA if not available in the EU.

Best wishes Barry G4DBS
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Julian, G4ILO]

Barry Middleton wrote

Is it possible to obtain a kit for this interface, I would prefer to
purchase from the EU but also the USA if not available in the EU.

I would love one as well but only a small number of kits or PCBs were made and they were snapped up in 2002 when the project was developed. As you can see from the website http://www.qsl.net/ea3blq/download_ang.htm this project has for some time been considered obsolete.

Sadly Pauli EA3BLQ the designer became a silent key in 2005. He was working on an improved interface which may well have become a kit once completed, but no-one has taken on the task of finishing it.

[Don Wilhelm-4]

Barry,

That interface is no longer available since Pauli became a silent key.
You can get the output half by using my Fixed Audio Output.

You may look on my webpage www.w3fpr.com to see the original article.  
Tom Hammond has created new boards for mounting between the Control
Board and the Front panel.  Look on Tom's website www.n0ss.net under K2
Specific Files.

73,
Don W3FPR

Barry Middleton wrote:
> Is it possible to obtain a kit for this interface, I would prefer to
> purchase from the EU but also the USA if not available in the EU.
>
> Best wishes Barry G4DBS
>  
>
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Julian, G4ILO]

Don Wilhelm-4 wrote

Barry,

That interface is no longer available since Pauli became a silent key.
You can get the output half by using my Fixed Audio Output.

It's worth mentioning that if you have the KAF2 module you can take off fixed level audio from there via a capacitor at adequate level to drive a sound card. I can dig out the schematic if anyone wants to know the exact take-off point but the details can probably be found by searching the archives.