K2 KDSP2

[Rolf G]

I have some problem with the filter settings in the KDSP2 module.
Is there a way to reset the the KDSP2 to its factory default values?

Best 73's,

Rolf   SMØYQC
K2 #4979
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ken Wagner K3IU]

G'morning Rolf:

I don't believe so. You will need to go to the manual and find the
page(s) that list the original settings and then manually go through the
settings menu and adjust them as necessary.

73,
Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
TWC wrote:
> I have some problem with the filter settings in the KDSP2 module.
> Is there a way to reset the the KDSP2 to its factory default values?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[George Victor-2]

I hate that module. There is no reset, and once installed it is the
most unfriendly filter to use.
In fact I pretty much put my K2 on the shelf after putting in the KDSP2.
Just my 2 cents.
George
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[DW Holtman]

George,

It is easy to remove, it you like the rig otherwise. Just my $0.02

Best,
DW Holtman
WB7SSN
----- Original Message -----
From: "George Victor" <[hidden email]>
To: "Ken K3IU" <[hidden email]>
Cc: <[hidden email]>; "TWC" <[hidden email]>
Sent: Saturday, March 29, 2008 11:59 AM
Subject: Re: [Elecraft] K2 KDSP2

>I hate that module. There is no reset, and once installed it is the
> most unfriendly filter to use.
> In fact I pretty much put my K2 on the shelf after putting in the KDSP2.
> Just my 2 cents.
> George
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Arie Kleingeld PA3A]

I agree on this, that is if you have to change the settings of the NR.

For the AF filtering it's another case. After I set the AF filtering for
CW and SSB, it's a joy to use.

Another 2 cents...


73 Arie PA3A



-----Oorspronkelijk bericht-----
Van: [hidden email]
[mailto:[hidden email]] Namens George Victor
Verzonden: zaterdag 29 maart 2008 19:00
Aan: Ken K3IU
CC: [hidden email]; TWC
Onderwerp: Re: [Elecraft] K2 KDSP2


I hate that module. There is no reset, and once installed it is the most
unfriendly filter to use. In fact I pretty much put my K2 on the shelf
after putting in the KDSP2. Just my 2 cents. George
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[DW Holtman]

Hello,

Thank you to everyone who helped me along the way building my K2. I crossed
the last hurddle today and got the KPA-100 up and running. I got it on the
air and made my first contact with K0DT  in Iowa. I was only pushing around
50 watts. I'm still a little nervous about the KPA-100.

Happy to finally get the chance to put this little rig to work.

Best,
DW Holtman
WB7SSN

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bill Johnson-9]

FYI, you can input the original settings easily enough, but having a reset
method would be quicker.  Perhaps there is one that someone can fill us in
on.  

I have played with mine to get it to where it does what I want, and that is
the beauty, to me, of the noise filter.  I have other radios with DSP and
whenever the noise filters are used they seem to do much worse than this
one, because the KDSP2 timing can be adjusted.  

My 2 cents.


72,

Bill

K9YEQ
K2 #35, K2 # 5279, KX1 #35, Mini Modules, etc.  


-----Original Message-----
Subject: RE: [Elecraft] K2 KDSP2

I agree on this, that is if you have to change the settings of the NR.

For the AF filtering it's another case. After I set the AF filtering for
CW and SSB, it's a joy to use.

Another 2 cents...


73 Arie PA3A


Onderwerp: Re: [Elecraft] K2 KDSP2


I hate that module. There is no reset, and once installed it is the most
unfriendly filter to use. In fact I pretty much put my K2 on the shelf
after putting in the KDSP2. Just my 2 cents. George
_______________________________________________

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com