K2 Mods list

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

K2 Mods list

Robert Cochrane
I'm the proud builder / owner of K2 No 3314 which I built in the
evenings at the start of my "retirement".

The reality was that I replaced one full time job with four part time
occupations, two of which involve global travel.

No regrets.  Never thought I would be able to visit Mongolia at
temperatures of 40C below and 40C above, or climb the volcanoes of
Nicaragua and El Salvador, or visit the ancient capital of Laos, or
see my old friends from my years in Asia again.

But the K2 has gathered dust under its embroidered felt cover for a
few years - there has never been time to get a temporary license for
these countries.  I now want to bring it up to the current
standards.  I have already carried out quite a few mods and have
parts sets for some more, but I really need a full list in date and
K2 number order of all the mods which a reasonably competent
un-solderer can make on the boards I already possess.

Can one of the Elecraft Elmers point me in the right direction
please?  Off list is fine unless you think the advice is of more
general interest.

Rob M0RAC

Robert A Cochrane
7 Lawn Terrace
Blackheath
London SE3 9LJ   UK

Tel (44) 020 8297 1978
Mob (44) 07764 197 701

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K2 Mods list

David Pratt
I would not dream of describing myself as an Elmer, but is this what you
are looking for?
http://www.qslnet.de/member/la3za/K2/modAny.html

73 de David G4DMP

In a recent message, Robert Cochrane <[hidden email]>
writes
>Can one of the Elecraft Elmers point me in the right direction
>please?  Off list is fine unless you think the advice is of more
>general interest.



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K2 Mods list

Byron N6NUL
Or perhaps the list of K2 mods from the Elecraft order page?  They
list K2 serial numbers that began including each and you should be
able to check them off:

http://www.elecraft.com/order_form_parts.htm#K2%20Parts

73, Byron N6NUL

On Thu, Dec 30, 2010 at 10:24 AM, David Pratt <[hidden email]> wrote:
> I would not dream of describing myself as an Elmer, but is this what you
> are looking for?
> http://www.qslnet.de/member/la3za/K2/modAny.html

--
- Northern California Contest Club
- CU in the 2011 Cal QSO Party 1-2 Oct 2011
- www.cqp.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K2 Mods list

Robert Cochrane
Many thanks to you both - the combination of the two is close to what
I was looking for.  I had already made a list from the Elecraft
component pages but was not sure it covered all the changes.

73 de Rob M0RAC

  At 18:31 30/12/2010, Byron Servies wrote:

>Or perhaps the list of K2 mods from the Elecraft order page?  They
>list K2 serial numbers that began including each and you should be
>able to check them off:
>
>http://www.elecraft.com/order_form_parts.htm#K2%20Parts
>
>73, Byron N6NUL
>
>On Thu, Dec 30, 2010 at 10:24 AM, David Pratt <[hidden email]> wrote:
> > I would not dream of describing myself as an Elmer, but is this what you
> > are looking for?
> > http://www.qslnet.de/member/la3za/K2/modAny.html
>
>--
>- Northern California Contest Club
>- CU in the 2011 Cal QSO Party 1-2 Oct 2011
>- www.cqp.org

Robert A Cochrane
7 Lawn Terrace
Blackheath
London SE3 9LJ   UK

Tel (44) 020 8297 1978
Mob (44) 07764 197 701

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

test message for change of address...

Rick Commo-2


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K2 Mods list

Don Wilhelm-4
In reply to this post by Robert Cochrane
  Rob.

You don't have that much to add to bring it up to level.
*E850138 - The temperature compensation for the PLL Reference Osc.
**K2KEYMDKT - The Keying Waveshape Mod (also requires updated firmware)
The Extremely Strong Signal Handling Mod - see application notes - no
kit, but requires only 2 1N4148 diodes.*

That is all the official Elecraft mods to bring it up to the current
level.  There are unofficial mods as well, but those are usually for a
certain situation - choose wisely, if the intent meets your purposes,
then try it, but if the originator's purpose does not fit you, then
bypass it.  Examples of the latter are my K2 Fixed Audio Output mod and
my CW PTT for the K2 (see my webpage www.w3fpr.com).

73,
Don W3FPR

On 12/30/2010 12:50 PM, Robert Cochrane wrote:

> I'm the proud builder / owner of K2 No 3314 which I built in the
> evenings at the start of my "retirement".
>
> The reality was that I replaced one full time job with four part time
> occupations, two of which involve global travel.
>
> No regrets.  Never thought I would be able to visit Mongolia at
> temperatures of 40C below and 40C above, or climb the volcanoes of
> Nicaragua and El Salvador, or visit the ancient capital of Laos, or
> see my old friends from my years in Asia again.
>
> But the K2 has gathered dust under its embroidered felt cover for a
> few years - there has never been time to get a temporary license for
> these countries.  I now want to bring it up to the current
> standards.  I have already carried out quite a few mods and have
> parts sets for some more, but I really need a full list in date and
> K2 number order of all the mods which a reasonably competent
> un-solderer can make on the boards I already possess.
>
> Can one of the Elecraft Elmers point me in the right direction
> please?  Off list is fine unless you think the advice is of more
> general interest.
>
> Rob M0RAC
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html