K2 SSB menu question...

[Steve Banks]

Hello Everyone,

This may be a pretty elementary question, but I'll ask it anyway.

Am I correct in concluding that the SSBa and SSBc menus CANNOT be edited without the KSB2 accessory in place on the K2 RF board? (All I see are -- entries in both menus when I try to edit them.)

This morning I connected a Heil - Elecraft MH2 mic after installing all 8 RF board header pins and the requisite 5.6K resistor on Pins 1-6 of the K2 mic jack and was surprised to discover that the PTT function works fine, but there seems to be no way to turn on any SSBa or SSBc menu choices.

Comments?

73 de

Steve Banks
K0PQ
Sent via BlackBerry from T-Mobile  
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Tom Zeltwanger]

Steve,

I believe these are both configuring parameters of the KSB2 board (audio level
and compression level). So you can't change them without that. Sounds like you
are trying to use SSB without the KSB2??

73,

Tom KG3V

Quoting [hidden email]:

> Hello Everyone,
>
> This may be a pretty elementary question, but I'll ask it anyway.
>
> Am I correct in concluding that the SSBa and SSBc menus CANNOT be edited
> without the KSB2 accessory in place on the K2 RF board? (All I see are --
> entries in both menus when I try to edit them.)
>
> This morning I connected a Heil - Elecraft MH2 mic after installing all 8 RF
> board header pins and the requisite 5.6K resistor on Pins 1-6 of the K2 mic
> jack and was surprised to discover that the PTT function works fine, but
> there seems to be no way to turn on any SSBa or SSBc menu choices.
>
> Comments?
>
> 73 de
>
> Steve Banks
> K0PQ
> Sent via BlackBerry from T-Mobile  
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[John Lonigro]

Steve:
PTT is the same as the dit line for CW, so that works because all you
are doing is closing the dit line with your mic PTT switch.
John AA0VE

[hidden email] wrote:
> This morning I connected a Heil - Elecraft MH2 mic after installing all 8 RF board header pins and the requisite 5.6K resistor on Pins 1-6 of the K2 mic jack and was surprised to discover that the PTT function works fine, but there seems to be no way to turn on any SSBa or SSBc menu choices.
>
>
>  
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com