K2 USB support with Timewave U232 ?
Locked
K2 USB support with Timewave U232 ?
 
|
Has anyone tried adding USB support to the K2 with the new Timewave U232 ?
http://timewave.com/support/U-232/index.html Thanks - Jim _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
RE: K2 USB support with Timewave U232 ?
|
|
Neat looking device, but you'd have to find a place to put it. They depend
on removing the DB-9 and using that space. You'd need to keep the DB-9 for it's AUX IO purposes. Might be simpler to use one of those $10 Serial to USB cables. At $80, it would sure hurt! Dan / WG4S / K2 #2456 -----Original Message----- From: [hidden email] [mailto:[hidden email]]On Behalf Of James Apple Sent: Wednesday, April 25, 2007 11:28 AM To: [hidden email] Subject: [Elecraft] K2 USB support with Timewave U232 ? Has anyone tried adding USB support to the K2 with the new Timewave U232 ? http://timewave.com/support/U-232/index.html Thanks - Jim _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Here is a $15 part to add a USB port to the K2. http://www.sparkfun.com/commerce/product_info.php?products_id=718 I got one today and connected it to the header on the control board. Ham Radio Deluxe identified the radio and is able to control it. If you don't have an internal battery installed, you can use that screw on the top panel to mount this board and the USB port lines up with the empty hole for the battery switch. Jim KA2RVO K2 #5919 >From: "Dan Barker" <[hidden email]> >To: <[hidden email]> >Subject: RE: [Elecraft] K2 USB support with Timewave U232 ? >Date: Wed, 25 Apr 2007 12:03:13 -0400 > >Neat looking device, but you'd have to find a place to put it. They depend >on removing the DB-9 and using that space. You'd need to keep the DB-9 for >it's AUX IO purposes. Might be simpler to use one of those $10 Serial to >USB >cables. > >At $80, it would sure hurt! > >Dan / WG4S / K2 #2456 > >-----Original Message----- >From: [hidden email] >[mailto:[hidden email]]On Behalf Of James Apple >Sent: Wednesday, April 25, 2007 11:28 AM >To: [hidden email] >Subject: [Elecraft] K2 USB support with Timewave U232 ? > > >Has anyone tried adding USB support to the K2 with the new Timewave U232 ? > >http://timewave.com/support/U-232/index.html > >Thanks > >- Jim >_______________________________________________ >Elecraft mailing list >Post to: [hidden email] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com > >_______________________________________________ >Elecraft mailing list >Post to: [hidden email] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
Re: K2 USB support with Timewave U232 ?
|
|
I've used one of these with the Z90 panadapter. It worked well in
that situation. 73, doug From: "James austin" <[hidden email]> Date: Sat, 28 Apr 2007 23:49:36 -0400 Here is a $15 part to add a USB port to the K2. http://www.sparkfun.com/commerce/product_info.php?products_id=718 I got one today and connected it to the header on the control board. Ham Radio Deluxe identified the radio and is able to control it. If you don't have an internal battery installed, you can use that screw on the top panel to mount this board and the USB port lines up with the empty hole for the battery switch. Jim KA2RVO K2 #5919 >From: "Dan Barker" <[hidden email]> >To: <[hidden email]> >Subject: RE: [Elecraft] K2 USB support with Timewave U232 ? >Date: Wed, 25 Apr 2007 12:03:13 -0400 > >Neat looking device, but you'd have to find a place to put it. They depend >on removing the DB-9 and using that space. You'd need to keep the DB-9 for >it's AUX IO purposes. Might be simpler to use one of those $10 Serial to >USB >cables. > >At $80, it would sure hurt! > >Dan / WG4S / K2 #2456 > >-----Original Message----- >From: [hidden email] >[mailto:[hidden email]]On Behalf Of James Apple >Sent: Wednesday, April 25, 2007 11:28 AM >To: [hidden email] >Subject: [Elecraft] K2 USB support with Timewave U232 ? > > >Has anyone tried adding USB support to the K2 with the new Timewave U232 ? > >http://timewave.com/support/U-232/index.html > >Thanks > >- Jim >_______________________________________________ >Elecraft mailing list >Post to: [hidden email] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com > >_______________________________________________ >Elecraft mailing list >Post to: [hidden email] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by James Apple
Here are the steps I took to get it working: 1) The board ties VCCIO to the 3.3v output on the chip. Youll need to remove the solder bridge. Details on their web page for the part. 2) Connect VCC to VCCIO, this ties it to 5v, I just installed a jumper wire on the board between the two. 3) Three wires connect to the header on the K2 control board. Make sure you wire TX to RX and vice versa between the K2 and this board. I let the unused RS-232 lines float and didn't jumper rts/cts. 4) Download the driver from ftdichip.com. This is a virtual com driver, the USB port looks like a serial port. The converter is bus powered from the computer. Ive been using it with Ham Radio Deluxe for a week and everything is working fine. There was some concern on the reflector over noise, but I havent found that to be a problem yet. There are bigger noise problems in the house. This board only provides control of the radio via the serial port, I didn't bring all the signals from the control board to the back panel, so if you want to control a KAT-100, you'll still need the KIO2 or equivalent. I just liked the idea of going from TTL serial on the control board directly to USB, rather than TTL -> RS-232 -> USB. There is an article in the latest QST which also discusses this chip. Jim KA2RVO >From: "John [K7SVV]" <[hidden email]> >To: "James austin" <[hidden email]> >CC: [hidden email] >Subject: Re: [Elecraft] K2 USB support with Timewave U232 ? >Date: Fri, 4 May 2007 20:58:53 -0700 > >Jim, > In today's mail I received a couple of the USB to Serial converters >you >spoke of. They look very interesting and I am anxious to get one of them >fired up in my K2 but I have a couple of questions that you will probably >be >able to help me with since you successfully got yours going. > > What did you do with the unused RS-232 control lines? The K2 only >uses >RXD, TXD, and GND. Did you jumper RTS to CTS as it is in the K2's serial >interface cable and did you tie the rest of them up or down or did you let >them float? > > You mentioned that you connected your converter to the header on the >front panel board. Would you describe what line you connected there and >did >you connect RXD and TXD to the real of the K2's DB9 connector? > > Is your converter bus powered from the USB interface and was your >board >already wired that way? > > Thank you for your help. 73 > >John [K7SVV] > > > > >On 4/28/07, James austin <[hidden email]> wrote: >> >> >>Here is a $15 part to add a USB port to the K2. >> >>http://www.sparkfun.com/commerce/product_info.php?products_id=718 >> >>I got one today and connected it to the header on the control board. Ham >>Radio Deluxe identified the radio and is able to control it. >> >>If you don't have an internal battery installed, you can use that screw on >>the top panel to mount this board and the USB port lines up with the empty >>hole for the battery switch. >> >>Jim KA2RVO >>K2 #5919 >> >> >From: "Dan Barker" <[hidden email]> >> >To: <[hidden email]> >> >Subject: RE: [Elecraft] K2 USB support with Timewave U232 ? >> >Date: Wed, 25 Apr 2007 12:03:13 -0400 >> > >> >Neat looking device, but you'd have to find a place to put it. They >>depend >> >on removing the DB-9 and using that space. You'd need to keep the DB-9 >>for >> >it's AUX IO purposes. Might be simpler to use one of those $10 Serial to >> >USB >> >cables. >> > >> >At $80, it would sure hurt! >> > >> >Dan / WG4S / K2 #2456 >> > >> >-----Original Message----- >> >From: [hidden email] >> >[mailto:[hidden email]]On Behalf Of James Apple >> >Sent: Wednesday, April 25, 2007 11:28 AM >> >To: [hidden email] >> >Subject: [Elecraft] K2 USB support with Timewave U232 ? >> > >> > >> >Has anyone tried adding USB support to the K2 with the new Timewave U232 >>? >> > >> >http://timewave.com/support/U-232/index.html >> > >> >Thanks >> > >> >- Jim >> >_______________________________________________ >> >Elecraft mailing list >> >Post to: [hidden email] >> >You must be a subscriber to post to the list. >> >Subscriber Info (Addr. Change, sub, unsub etc.): >> > http://mailman.qth.net/mailman/listinfo/elecraft >> > >> >Help: http://mailman.qth.net/subscribers.htm >> >Elecraft web page: http://www.elecraft.com >> > >> >_______________________________________________ >> >Elecraft mailing list >> >Post to: [hidden email] >> >You must be a subscriber to post to the list. >> >Subscriber Info (Addr. Change, sub, unsub etc.): >> > http://mailman.qth.net/mailman/listinfo/elecraft >> > >> >Help: http://mailman.qth.net/subscribers.htm >> >Elecraft web page: http://www.elecraft.com >> >> >>_______________________________________________ >>Elecraft mailing list >>Post to: [hidden email] >>You must be a subscriber to post to the list. >>Subscriber Info (Addr. Change, sub, unsub etc.): >>http://mailman.qth.net/mailman/listinfo/elecraft >> >>Help: http://mailman.qth.net/subscribers.htm >>Elecraft web page: http://www.elecraft.com >> > > > >-- >John [K7SVV] _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |