K2 issue or is it?

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K2 issue or is it?

barry halterman
Greetings folks. My K2 has a snapping sound when tuning the band regardless
of mode and it seems to happen when I am close to a signal...within 4 khz
or so. The snapping sound can be very strong sending the s meter soaring.
Not only does the s meter go soaring, so do my ears!
At this point I am not sure if this is more or less the nature of the
beast....
Don't remember reading anything in the reviews about this oddity.
Barry
K3Bo
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K2 issue or is it?

Mike K8CN
Barry, can you provide more detail about the K2 settings when you hear the
snapping sounds?
 
For example, does this effect occur only in CW mode, or in USB and LSB modes
as well?

For which filter settings does it occur (both CW and SSB filter settings)?

Is your AGC turned ON or OFF?

Does the snapping subside if the RF (actually IF) gain is backed off?

Does the snapping subside if the AF gain is backed off?

Does this phenomenon occur on all bands or just a few bands?

Don, W3FPR, will likely have a few possible causes immediately in mind after
repairing hundreds of K2 radios over the years!

73,
Mike, K8CN




--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K2 issue or is it?

Don Wilhelm
In reply to this post by barry halterman
Barry,

That can happen if you ran CAL PLL with the bottom cover off.  Try it again.

73,
Don W3FPR

On 9/15/2020 8:38 PM, barry halterman wrote:
> Greetings folks. My K2 has a snapping sound when tuning the band regardless
> of mode and it seems to happen when I am close to a signal...within 4 khz
> or so. The snapping sound can be very strong sending the s meter soaring.
> Not only does the s meter go soaring, so do my ears!
> At this point I am not sure if this is more or less the nature of the
> beast....
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]