K2 mobile,

[randyowen]

Would like some ideas for static bleeding, run a semi truck mobile,and have had problems with d16 and17 in the kpa100 from static, Don W. Has given me a homebrew idea, but also wondering if there is any good commercial products made to go across the feed line. Thanks

[Vic Rosenthal]

I use lightning protection devices formerly made by ICE, which are very
effective for any kind of static discharge. They are now produced and
sold by Array Solutions. You can see a picture and schematic here:
<http://www.arraysolutions.com/Products/surge_arrestorAS-3xx.htm>

On 5/21/2014 10:19 AM, randyowen wrote:
> Would like some ideas for static bleeding, run a semi truck mobile,and have
> had problems with d16 and17 in the kpa100 from static, Don W. Has given me a
> homebrew idea, but also wondering if there is any good commercial products
> made to go across the feed line. Thanks

--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Fred Townsend-2]

Vic the Array Soltions arrester looks like a good part but I believe you should be running a UnUn, such as the W1JR-50-1 mobile. It costs a little more but will take care of RF getting back into the cab and arrest static. Just my 2 cents.
73
Fred, AE6QL

-----Original Message-----

>From: Vic Rosenthal K2VCO <[hidden email]>
>Sent: May 21, 2014 11:52 AM
>To: [hidden email]
>Subject: Re: [Elecraft] K2 mobile,
>
>I use lightning protection devices formerly made by ICE, which are very
>effective for any kind of static discharge. They are now produced and
>sold by Array Solutions. You can see a picture and schematic here:
><http://www.arraysolutions.com/Products/surge_arrestorAS-3xx.htm>
>
>On 5/21/2014 10:19 AM, randyowen wrote:
>> Would like some ideas for static bleeding, run a semi truck mobile,and have
>> had problems with d16 and17 in the kpa100 from static, Don W. Has given me a
>> homebrew idea, but also wondering if there is any good commercial products
>> made to go across the feed line. Thanks
>
>--
>73,
>Vic, K2VCO
>Fresno CA
>http://www.qsl.net/k2vco/
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]