Elecraft

K2 stacked over KAT100

Classic

List

Threaded

3 messages Options

John Wiener

K2 stacked over KAT100

Hi

I don't recall where I saw this but I think someone posted a smart
way to keep the K2 from slipping slowly off the back ot the KAT100
while hitting the buttons.

Can someone direct me to it?

Thanks!

John
AB8O
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Don Wilhelm-4

Re: K2 stacked over KAT100

John,

In the KAT100 kit, there are 2 anti-slide brackets PN E100150 that mount
on the top rear of the KAT100 enclosure. The projections on these
brackets fit into the recessed holes in the rear feet of your K2. Page
30 of the KAT100 manual shows how they are mounted.

If you ordered the KAT100-2 (the one that mounts in the EC-2 enclosure),
those brackets are not included. Normally the KPA100 is mounted in the
EC-2 with the KAT100, and the K2 should not be stacked on top of that
assembly because it restricts the air flow.

73,
Don W3FPR

John Wiener wrote:

> Hi
>
> I don't recall where I saw this but I think someone posted a smart
> way to keep the K2 from slipping slowly off the back ot the KAT100
> while hitting the buttons.
>
> Can someone direct me to it?
>
> Thanks!
>
> John
> AB8O
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.237 / Virus Database: 270.10.25/1955 - Release Date: 02/16/09 06:55:00
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Tom Hammond-2

Re: K2 stacked over KAT100

In reply to this post by John Wiener

John:

Elecraft offers (probably for a price) two (2) little devices which screw
to the top back edge of the bottom case and into which the feet of the
upper device fit. Works great.

Unfortunately, I don't recall what the heck they're called, but I'll bet
Lisa or someone else around there will know.

73,

Tom N0SS

At 15:42 02/16/2009, you wrote: