Thanks Bob and Don (Don that's two I owe, you helped me in the past on my K2 build :-) - I had FL5 selected instead of FL1 (2.8), which would explain things (FL5=250Hz). 5W Cal now completed successfully.
Thanks!
Ken, G0RVH
--
Ken Dailey
On 9 Sep 2012, at 13:34, Bob Wolbert, K6XX wrote:
> Your transmit filter is not configured correctly. Look at the 2.7 ( or 2.8) filter. Is it enabled for CW transmit?
>
> 73 de Bob, K6XX
>
> On Sep 9, 2012, at 2:53 AM, Ken Dailey <
[hidden email]> wrote:
>
>> I'm just building a new K3, and have come to the point of performing the TX Gain Calibration. I have the K3 hooked up to the iMac via a KUSB, and the two are talking to each other fine. However when I run the 5W gain cal, I get this failure message :
>>
>> Elecraft K3 Utility for OS X Version 1.12.3.28B
>> OS X Version 10.7.4 (Lion)
>> K3 MCU version 04.51. RS-232 speed 9600 bps.
>> Starting 5 watt calibration.
>> Calibrating at 1.900 MHz
>> IsSamplingComplete: Unexpected response 'DS@@@@1∞>IÄÄ;' to 'DS;'. State 220
>> Calibration power settled at 'ERR TXF;'
>> 5 watt calibration failed.
>> Elapsed time: 6.6 secs
>>
>> Anyone have any ideas what the problem is?
>>
>> Thanks,
>>
>> Ken, G0RVH
>>
>> --
>> Ken Dailey
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:
http://mailman.qth.net/mailman/listinfo/elecraft>> Help:
http://mailman.qth.net/mmfaq.htm>> Post: mailto:
[hidden email]
>>
>> This list hosted by:
http://www.qsl.net>> Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
