Not quite sure what's going on here; have had the K3 in storage for
about 4 months. Finally unpacked it after our move to PA and set it up, and now audio is cutting in and out; as if it would just mute for a few seconds (sometimes 4-5 secs) then come back to a normal level. I'm wondering if the RF overload protection is engaging as the weather here has been quite stormy, and I suspect lightning interference. How can I confirm? It's been a long time since I've been on the air with the K3 that I've forgotten quite a bit. Any suggestions? -- 73 de James K2QI President UNARC/4U1UN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...
|
Administrator
|
Hi James,
Could you have the squelch turned up? 73, Eric WA6HHQ --- www.elecraft.com On 8/9/2011 5:56 PM, James Sarte (K2QI) wrote: > Not quite sure what's going on here; have had the K3 in storage for > about 4 months. Finally unpacked it after our move to PA and set it > up, and now audio is cutting in and out; as if it would just mute for > a few seconds (sometimes 4-5 secs) then come back to a normal level. > I'm wondering if the RF overload protection is engaging as the weather > here has been quite stormy, and I suspect lightning interference. How > can I confirm? It's been a long time since I've been on the air with > the K3 that I've forgotten quite a bit. > > Any suggestions? Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Hi Eric,
No, squelch is wide open. It was cutting out on SSB, FM, AM, etc. For what it's worth, it isn't doing it anymore! Strange... I wonder if lightning in the distance was causing the overload circuitry to kick in. Is it possible? 73 de James K2QI On Tue, Aug 9, 2011 at 9:12 PM, Eric Swartz - WA6HHQ, Elecraft <[hidden email]> wrote: > Hi James, > > Could you have the squelch turned up? > > 73, Eric WA6HHQ > > --- > www.elecraft.com > > On 8/9/2011 5:56 PM, James Sarte (K2QI) wrote: >> >> Not quite sure what's going on here; have had the K3 in storage for >> about 4 months. Finally unpacked it after our move to PA and set it >> up, and now audio is cutting in and out; as if it would just mute for >> a few seconds (sometimes 4-5 secs) then come back to a normal level. >> I'm wondering if the RF overload protection is engaging as the weather >> here has been quite stormy, and I suspect lightning interference. How >> can I confirm? It's been a long time since I've been on the air with >> the K3 that I've forgotten quite a bit. >> >> Any suggestions? > -- 73 de James K2QI President UNARC/4U1UN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...
|
Administrator
|
Unlikely. If it is activated, you get a 'Hi RFI' message on the VFO B
display. 73, Eric --- www.elecraft.com On 8/9/2011 6:15 PM, James Sarte (K2QI) wrote: > Hi Eric, > > No, squelch is wide open. It was cutting out on SSB, FM, AM, etc. > For what it's worth, it isn't doing it anymore! Strange... I wonder > if lightning in the distance was causing the overload circuitry to > kick in. Is it possible? > > 73 de James K2QI > > On Tue, Aug 9, 2011 at 9:12 PM, Eric Swartz - WA6HHQ, Elecraft > <[hidden email]> wrote: >> Hi James, >> >> Could you have the squelch turned up? >> >> 73, Eric WA6HHQ >> >> --- >> www.elecraft.com >> >> On 8/9/2011 5:56 PM, James Sarte (K2QI) wrote: >>> Not quite sure what's going on here; have had the K3 in storage for >>> about 4 months. Finally unpacked it after our move to PA and set it >>> up, and now audio is cutting in and out; as if it would just mute for >>> a few seconds (sometimes 4-5 secs) then come back to a normal level. >>> I'm wondering if the RF overload protection is engaging as the weather >>> here has been quite stormy, and I suspect lightning interference. How >>> can I confirm? It's been a long time since I've been on the air with >>> the K3 that I've forgotten quite a bit. >>> >>> Any suggestions? > > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Can any contacts have gotten corroded internally and perhaps after the
unit warms up, a better contact is made due to thermal expansion? Reason I ask, I noticed that the screws on my K3 have begun to rust while sitting in storage. 73, James K2QI On Tue, Aug 9, 2011 at 9:16 PM, Eric Swartz - WA6HHQ, Elecraft <[hidden email]> wrote: > Unlikely. If it is activated, you get a 'Hi RFI' message on the VFO B > display. > > 73, Eric > > --- > www.elecraft.com > > > On 8/9/2011 6:15 PM, James Sarte (K2QI) wrote: >> >> Hi Eric, >> >> No, squelch is wide open. It was cutting out on SSB, FM, AM, etc. >> For what it's worth, it isn't doing it anymore! Strange... I wonder >> if lightning in the distance was causing the overload circuitry to >> kick in. Is it possible? >> >> 73 de James K2QI >> >> On Tue, Aug 9, 2011 at 9:12 PM, Eric Swartz - WA6HHQ, Elecraft >> <[hidden email]> wrote: >>> >>> Hi James, >>> >>> Could you have the squelch turned up? >>> >>> 73, Eric WA6HHQ >>> >>> --- >>> www.elecraft.com >>> >>> On 8/9/2011 5:56 PM, James Sarte (K2QI) wrote: >>>> >>>> Not quite sure what's going on here; have had the K3 in storage for >>>> about 4 months. Finally unpacked it after our move to PA and set it >>>> up, and now audio is cutting in and out; as if it would just mute for >>>> a few seconds (sometimes 4-5 secs) then come back to a normal level. >>>> I'm wondering if the RF overload protection is engaging as the weather >>>> here has been quite stormy, and I suspect lightning interference. How >>>> can I confirm? It's been a long time since I've been on the air with >>>> the K3 that I've forgotten quite a bit. >>>> >>>> Any suggestions? >> >> > -- 73 de James K2QI President UNARC/4U1UN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...
|
In reply to this post by K2QI
You might check to see if you have the all mode squelch activated. Check
the config menu SQ MAIN setting. 73, Fred KE7X "The Elecraft K3: Design, Configuration, and Operation" www.ke7x.com -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of James Sarte (K2QI) Sent: Tuesday, August 09, 2011 6:56 PM To: Elecraft Subject: [Elecraft] [K3] Audio cutting out?? Not quite sure what's going on here; have had the K3 in storage for about 4 months. Finally unpacked it after our move to PA and set it up, and now audio is cutting in and out; as if it would just mute for a few seconds (sometimes 4-5 secs) then come back to a normal level. I'm wondering if the RF overload protection is engaging as the weather here has been quite stormy, and I suspect lightning interference. How can I confirm? It's been a long time since I've been on the air with the K3 that I've forgotten quite a bit. Any suggestions? -- 73 de James K2QI President UNARC/4U1UN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by K2QI
Does it go into xmit? Check the VOX settings.
73, Mike NF4L On 8/9/2011 8:56 PM, James Sarte (K2QI) wrote: > Not quite sure what's going on here; have had the K3 in storage for > about 4 months. Finally unpacked it after our move to PA and set it > up, and now audio is cutting in and out; as if it would just mute for > a few seconds (sometimes 4-5 secs) then come back to a normal level. > I'm wondering if the RF overload protection is engaging as the weather > here has been quite stormy, and I suspect lightning interference. How > can I confirm? It's been a long time since I've been on the air with > the K3 that I've forgotten quite a bit. > > Any suggestions? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |