Elecraft › [K3]

K3 BEEP BEEP BEEP

Classic

List

Threaded

13 messages Options

Steve Ellington

K3 BEEP BEEP BEEP

Here I set knowing that if I push the "TUNE" button I will wake up everyone.
Why? Because it emits a beep and it's loud. Why is loud? Because my MON
level is turned up really high. Oh I would love to turn it down but if I try
that it will emit a LOUD TONE until I get it turned down. There's only one
known solution, activate headphones, adjust the MON level then go back to
spkr.
Yes....When using headphones I have to crank up the cw sidetone to about 42.
If I forget to turn it back down to 15 before removing the headphones, I'm
faced with the loud beep/tone syndrome again.

Here's how this SHOULD work.

When I press MON, I should be able to set the sidetone level without dealing
with a constant tone! I could then set the MON for whatever level I want
without waking up the entire neighborhood.
When I press TUNE (to activate my ext. autotuner) NO BEEP PLEASE

I don't mind having to change the sidetone level every time go from spkr to
headphone...I realize that's due to impedance and sensitivity variations BUT
I don't want loud, wanted, beep or tone when I do this. I'm sure this could
be done via firmware. If for some strange reason someone wants these noises
then maybe it could be a menu option.

Other than that my nearly 2 yr. old K3 has been fine except for the static
electricity problem. When I touch the VFO A knob sometimes the screen goes
blank, frequency changes and headphone changes to speaker output. Yea it's
grounded to all kinds of things plus it's a new FP. Just weird I guess. 73

Steve
N4LQ
[hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

drewko

Re: K3 BEEP BEEP BEEP

You could assign a switch macro that would set the MON level to zero
every time you want to adjust it:

ML000;SWH56;

This sets the level to 0 then turns on MON for adjustment. All you
have to do is twist the knob.

You can also have a switch macro to set the MON level to zero before a
TUNE...

ML000;SWH16;

but then you will manually have to adjust MON back up to your desired
level after the TUNE (for which you can "safely" use the previous
macro or MON).

On a related topic... it would be really great if we could hear live
signals as we adjust PITCH instead of hearing the steady sidetone. It
is the pitch of the signals that we really want to adjust, not the
pitch of the sidetone per se. It would be helpful to be able to hear
the signals as their pitch was being adjusted. Different pitches are
useful under different conditions of QRN and QRM and "live" pitch
adjustement would help in finding the optimal setting.

73,
Drew
AF2Z

On Mon, 02 Nov 2009 10:23:16 -0500, Steve N4LQ wrote:

>Here I set knowing that if I push the "TUNE" button I will wake up everyone.
>Why? Because it emits a beep and it's loud. Why is loud? Because my MON
>level is turned up really high. Oh I would love to turn it down but if I try
>that it will emit a LOUD TONE until I get it turned down. There's only one
>known solution, activate headphones, adjust the MON level then go back to
>spkr.
>Yes....When using headphones I have to crank up the cw sidetone to about 42.
>If I forget to turn it back down to 15 before removing the headphones, I'm
>faced with the loud beep/tone syndrome again.
>
>Here's how this SHOULD work.
>
>When I press MON, I should be able to set the sidetone level without dealing
>with a constant tone! I could then set the MON for whatever level I want
>without waking up the entire neighborhood.
>When I press TUNE (to activate my ext. autotuner) NO BEEP PLEASE
>
>I don't mind having to change the sidetone level every time go from spkr to
>headphone...I realize that's due to impedance and sensitivity variations BUT
>I don't want loud, wanted, beep or tone when I do this. I'm sure this could
>be done via firmware. If for some strange reason someone wants these noises
>then maybe it could be a menu option.
>
>Other than that my nearly 2 yr. old K3 has been fine except for the static
>electricity problem. When I touch the VFO A knob sometimes the screen goes
>blank, frequency changes and headphone changes to speaker output. Yea it's
>grounded to all kinds of things plus it's a new FP. Just weird I guess. 73
>
>Steve
>N4LQ
>[hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Mike Reublin

Re: K3 BEEP BEEP BEEP

On a related topic... it would be really great if we could hear live

> signals as we adjust PITCH instead of hearing the steady sidetone. It
> is the pitch of the signals that we really want to adjust, not the
> pitch of the sidetone per se. It would be helpful to be able to hear
> the signals as their pitch was being adjusted. Different pitches are
> useful under different conditions of QRN and QRM and "live" pitch
> adjustement would help in finding the optimal setting.
>
> 73,
> Drew
> AF2Z
>

+1 for that.

Mike NF4L

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Steve Ellington

Re: K3 BEEP BEEP BEEP

In reply to this post by drewko

Holy Macro! I need to go to the school of macros. We just need to get rid of
that silly constant sidetone pitch thing, constant tone mon level thing and
beeping tune button.

Steve
N4LQ
[hidden email]
----- Original Message -----
From: "drewko" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 02, 2009 1:18 PM
Subject: Re: [Elecraft] K3 BEEP BEEP BEEP

> You could assign a switch macro that would set the MON level to zero
> every time you want to adjust it:
>
> ML000;SWH56;
>
> This sets the level to 0 then turns on MON for adjustment. All you
> have to do is twist the knob.
>
> You can also have a switch macro to set the MON level to zero before a
> TUNE...
>
> ML000;SWH16;
>
> but then you will manually have to adjust MON back up to your desired
> level after the TUNE (for which you can "safely" use the previous
> macro or MON).
>
> On a related topic... it would be really great if we could hear live
> signals as we adjust PITCH instead of hearing the steady sidetone. It
> is the pitch of the signals that we really want to adjust, not the
> pitch of the sidetone per se. It would be helpful to be able to hear
> the signals as their pitch was being adjusted. Different pitches are
> useful under different conditions of QRN and QRM and "live" pitch
> adjustement would help in finding the optimal setting.
>
> 73,
> Drew
> AF2Z
>
>
>
>
>
> On Mon, 02 Nov 2009 10:23:16 -0500, Steve N4LQ wrote:
>
>>Here I set knowing that if I push the "TUNE" button I will wake up
>>everyone.
>>Why? Because it emits a beep and it's loud. Why is loud? Because my MON
>>level is turned up really high. Oh I would love to turn it down but if I
>>try
>>that it will emit a LOUD TONE until I get it turned down. There's only one
>>known solution, activate headphones, adjust the MON level then go back to
>>spkr.
>>Yes....When using headphones I have to crank up the cw sidetone to about
>>42.
>>If I forget to turn it back down to 15 before removing the headphones, I'm
>>faced with the loud beep/tone syndrome again.
>>
>>Here's how this SHOULD work.
>>
>>When I press MON, I should be able to set the sidetone level without
>>dealing
>>with a constant tone! I could then set the MON for whatever level I want
>>without waking up the entire neighborhood.
>>When I press TUNE (to activate my ext. autotuner) NO BEEP PLEASE
>>
>>I don't mind having to change the sidetone level every time go from spkr
>>to
>>headphone...I realize that's due to impedance and sensitivity variations
>>BUT
>>I don't want loud, wanted, beep or tone when I do this. I'm sure this
>>could
>>be done via firmware. If for some strange reason someone wants these
>>noises
>>then maybe it could be a menu option.
>>
>>Other than that my nearly 2 yr. old K3 has been fine except for the static
>>electricity problem. When I touch the VFO A knob sometimes the screen goes
>>blank, frequency changes and headphone changes to speaker output. Yea it's
>>grounded to all kinds of things plus it's a new FP. Just weird I guess. 73
>>
>>Steve
>>N4LQ
>>[hidden email]
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

--------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.698 / Virus Database: 270.14.45/2476 - Release Date: 11/02/09
02:51:00

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

DC1RS

Re: K3 BEEP BEEP BEEP

In reply to this post by Steve Ellington

Steve Ellington wrote

...if I push the "TUNE" button I will wake up everyone...

What FW-Version are you using?
Pressing the "TUNE" button here with FW 3.52 no sidetone is audible.

73 de Roland, DC1RS

K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K, KFL3A-400, KAT3, KXV3A, LP-Pan

Brett Howard

Re: K3 BEEP BEEP BEEP

Yes I too would enjoy being able to adjust the side tone while hearing
live on air signals rather than a tone representing the current
setting.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Steve Ellington

Re: K3 BEEP BEEP BEEP

In reply to this post by DC1RS

Press and hold XMIT to activate tune. It makes a beep. Press again, it makes
another beep. Loudness depends upon mon setting. FW is ver. 3.52 also
Steve
N4LQ
[hidden email]
----- Original Message -----
From: "DC1RS" <[hidden email]>
To: <[hidden email]>
Sent: Monday, November 02, 2009 3:25 PM
Subject: Re: [Elecraft] [K3] K3 BEEP BEEP BEEP

>
>
> Steve Ellington wrote:
>>
>>
>> ...if I push the "TUNE" button I will wake up everyone...
>>
>>
>
> What FW-Version are you using?
> Pressing the "TUNE" button here with FW 3.52 no sidetone is audible.
>
> 73 de Roland, DC1RS
>
> -----
> K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K,
> KFL3A-400,
> KAT3, KXV3A
> --
> View this message in context:
> http://n2.nabble.com/K3-BEEP-BEEP-BEEP-tp3932363p3934422.html
> Sent from the [K3] mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

Iain MacDonnell - N6ML-2

Re: K3 BEEP BEEP BEEP

FWIW, there is no side-tone on TUNE here either. There is a
button-beep, but it's soft, and not related to MON level.

~Iain / N6ML

On Mon, Nov 2, 2009 at 10:00 PM, Steve Ellington <[hidden email]> wrote:

> Press and hold XMIT to activate tune. It makes a beep. Press again, it makes
> another beep. Loudness depends upon mon setting. FW is ver. 3.52 also
> Steve
> N4LQ
> [hidden email]
> ----- Original Message -----
> From: "DC1RS" <[hidden email]>
> To: <[hidden email]>
> Sent: Monday, November 02, 2009 3:25 PM
> Subject: Re: [Elecraft] [K3] K3 BEEP BEEP BEEP
>
>
>>
>>
>> Steve Ellington wrote:
>>>
>>>
>>> ...if I push the "TUNE" button I will wake up everyone...
>>>
>>>
>>
>> What FW-Version are you using?
>> Pressing the "TUNE" button here with FW 3.52 no sidetone is audible.
>>
>> 73 de Roland, DC1RS
>>
>> -----
>> K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K,
>> KFL3A-400,
>> KAT3, KXV3A
>> --
>> View this message in context:
>> http://n2.nabble.com/K3-BEEP-BEEP-BEEP-tp3932363p3934422.html
>> Sent from the [K3] mailing list archive at Nabble.com.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.698 / Virus Database: 270.14.45/2476 - Release Date: 11/02/09
> 02:51:00
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

Steve Ellington

Re: K3 BEEP BEEP BEEP

Iain:
Huh?
Crank up your mon and push the tune button. It gets louder. Turn mon down.
It gets quieter.

Steve
N4LQ
[hidden email]
----- Original Message -----
From: "Iain MacDonnell - N6ML" <[hidden email]>
To: "Steve Ellington" <[hidden email]>
Cc: "DC1RS" <[hidden email]>; <[hidden email]>
Sent: Monday, November 02, 2009 6:24 PM
Subject: Re: [Elecraft] [K3] K3 BEEP BEEP BEEP

> FWIW, there is no side-tone on TUNE here either. There is a
> button-beep, but it's soft, and not related to MON level.
>
> ~Iain / N6ML
>
>
> On Mon, Nov 2, 2009 at 10:00 PM, Steve Ellington <[hidden email]>
> wrote:
>> Press and hold XMIT to activate tune. It makes a beep. Press again, it
>> makes
>> another beep. Loudness depends upon mon setting. FW is ver. 3.52 also
>> Steve
>> N4LQ
>> [hidden email]
>> ----- Original Message -----
>> From: "DC1RS" <[hidden email]>
>> To: <[hidden email]>
>> Sent: Monday, November 02, 2009 3:25 PM
>> Subject: Re: [Elecraft] [K3] K3 BEEP BEEP BEEP
>>
>>
>>>
>>>
>>> Steve Ellington wrote:
>>>>
>>>>
>>>> ...if I push the "TUNE" button I will wake up everyone...
>>>>
>>>>
>>>
>>> What FW-Version are you using?
>>> Pressing the "TUNE" button here with FW 3.52 no sidetone is audible.
>>>
>>> 73 de Roland, DC1RS
>>>
>>> -----
>>> K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K,
>>> KFL3A-400,
>>> KAT3, KXV3A
>>> --
>>> View this message in context:
>>> http://n2.nabble.com/K3-BEEP-BEEP-BEEP-tp3932363p3934422.html
>>> Sent from the [K3] mailing list archive at Nabble.com.
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 9.0.698 / Virus Database: 270.14.45/2476 - Release Date:
>> 11/02/09
>> 02:51:00
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>

--------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.698 / Virus Database: 270.14.46/2477 - Release Date: 11/02/09
14:39:00

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Iain MacDonnell - N6ML-2

Re: K3 BEEP BEEP BEEP

In reply to this post by Iain MacDonnell - N6ML-2

Upon further investigation, I noticed that if I turn OFF
CONFIG:SW-TONE, there is a short burst of tone, which varies with CW
MON level, on starting and stopping TUNE.

Is this a firmware bug?

~Iain / N6ML

On Mon, Nov 2, 2009 at 3:24 PM, Iain MacDonnell - N6ML <[hidden email]> wrote:

> FWIW, there is no side-tone on TUNE here either. There is a
> button-beep, but it's soft, and not related to MON level.
>
> ~Iain / N6ML
>
>
> On Mon, Nov 2, 2009 at 10:00 PM, Steve Ellington <[hidden email]> wrote:
>> Press and hold XMIT to activate tune. It makes a beep. Press again, it makes
>> another beep. Loudness depends upon mon setting. FW is ver. 3.52 also
>> Steve
>> N4LQ
>> [hidden email]
>> ----- Original Message -----
>> From: "DC1RS" <[hidden email]>
>> To: <[hidden email]>
>> Sent: Monday, November 02, 2009 3:25 PM
>> Subject: Re: [Elecraft] [K3] K3 BEEP BEEP BEEP
>>
>>
>>>
>>>
>>> Steve Ellington wrote:
>>>>
>>>>
>>>> ...if I push the "TUNE" button I will wake up everyone...
>>>>
>>>>
>>>
>>> What FW-Version are you using?
>>> Pressing the "TUNE" button here with FW 3.52 no sidetone is audible.
>>>
>>> 73 de Roland, DC1RS
>>>
>>> -----
>>> K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K,
>>> KFL3A-400,
>>> KAT3, KXV3A
>>> --
>>> View this message in context:
>>> http://n2.nabble.com/K3-BEEP-BEEP-BEEP-tp3932363p3934422.html
>>> Sent from the [K3] mailing list archive at Nabble.com.
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 9.0.698 / Virus Database: 270.14.45/2476 - Release Date: 11/02/09
>> 02:51:00
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>

Steve Ellington

Re: K3 BEEP BEEP BEEP

Yes...When CONFIG: SW-TONE is OFF, the tune button beeps. It seems to be the
only one that beeps and it does follow the mon gain. That has to be a bug.

Steve
N4LQ
[hidden email]
----- Original Message -----
From: "Iain MacDonnell - N6ML" <[hidden email]>
To: "Steve Ellington" <[hidden email]>
Cc: "DC1RS" <[hidden email]>; <[hidden email]>
Sent: Monday, November 02, 2009 6:58 PM
Subject: Re: [Elecraft] [K3] K3 BEEP BEEP BEEP

Upon further investigation, I noticed that if I turn OFF
CONFIG:SW-TONE, there is a short burst of tone, which varies with CW
MON level, on starting and stopping TUNE.

Is this a firmware bug?

~Iain / N6ML

On Mon, Nov 2, 2009 at 3:24 PM, Iain MacDonnell - N6ML <[hidden email]>
wrote:

--------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.698 / Virus Database: 270.14.46/2477 - Release Date: 11/02/09
14:39:00

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Joe Planisky

Re: K3 BEEP BEEP BEEP

In reply to this post by Steve Ellington

The button-beep seems to vary with MON level only in CW mode. In
other modes, it's a constant (relatively quiet) level. At least
that's the behavior on my rig with FW 3.52.

My question is why it's there at all when I have switch tones turned
off.

73
--
Joe KB8AP

On Nov 2, 2009, at 3:42 PM, Steve Ellington wrote:

> Iain:
> Huh?
> Crank up your mon and push the tune button. It gets louder. Turn mon
> down.
> It gets quieter.
>
> Steve
> N4LQ
> [hidden email]
> ----- Original Message -----
> From: "Iain MacDonnell - N6ML" <[hidden email]>
> To: "Steve Ellington" <[hidden email]>
> Cc: "DC1RS" <[hidden email]>; <[hidden email]>
> Sent: Monday, November 02, 2009 6:24 PM
> Subject: Re: [Elecraft] [K3] K3 BEEP BEEP BEEP
>
>
>> FWIW, there is no side-tone on TUNE here either. There is a
>> button-beep, but it's soft, and not related to MON level.
>>
>> ~Iain / N6ML
>>
>>
>> On Mon, Nov 2, 2009 at 10:00 PM, Steve Ellington <[hidden email]
>> >
>> wrote:
>>> Press and hold XMIT to activate tune. It makes a beep. Press
>>> again, it
>>> makes
>>> another beep. Loudness depends upon mon setting. FW is ver. 3.52
>>> also
>>> Steve
>>> N4LQ
>>> [hidden email]
>>> ----- Original Message -----
>>> From: "DC1RS" <[hidden email]>
>>> To: <[hidden email]>
>>> Sent: Monday, November 02, 2009 3:25 PM
>>> Subject: Re: [Elecraft] [K3] K3 BEEP BEEP BEEP
>>>
>>>
>>>>
>>>>
>>>> Steve Ellington wrote:
>>>>>
>>>>>
>>>>> ...if I push the "TUNE" button I will wake up everyone...
>>>>>
>>>>>
>>>>
>>>> What FW-Version are you using?
>>>> Pressing the "TUNE" button here with FW 3.52 no sidetone is
>>>> audible.
>>>>
>>>> 73 de Roland, DC1RS
>>>>
>>>> -----
>>>> K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K,
>>>> KFL3A-400,
>>>> KAT3, KXV3A
>>>> --
>>>> View this message in context:
>>>> http://n2.nabble.com/K3-BEEP-BEEP-BEEP-tp3932363p3934422.html
>>>> Sent from the [K3] mailing list archive at Nabble.com.
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:[hidden email]
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>>> --------------------------------------------------------------------------------
>>>
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 9.0.698 / Virus Database: 270.14.45/2476 - Release Date:
>>> 11/02/09
>>> 02:51:00
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.698 / Virus Database: 270.14.46/2477 - Release Date:
> 11/02/09
> 14:39:00
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

wayne burdick

Re: K3 BEEP BEEP BEEP

Administrator

In reply to this post by Iain MacDonnell - N6ML-2

This is normal. There's always been a start/stop tone for TUNE, even
when SW TONES are not enabled.

Wayne
N6KR

On Nov 2, 2009, at 3:58 PM, Iain MacDonnell - N6ML wrote:

> Upon further investigation, I noticed that if I turn OFF
> CONFIG:SW-TONE, there is a short burst of tone, which varies with CW
> MON level, on starting and stopping TUNE.
>
> Is this a firmware bug?
>
> ~Iain / N6ML
>
>
> On Mon, Nov 2, 2009 at 3:24 PM, Iain MacDonnell - N6ML
> <[hidden email]> wrote:
>> FWIW, there is no side-tone on TUNE here either. There is a
>> button-beep, but it's soft, and not related to MON level.
>>
>> ~Iain / N6ML
>>
>>
>> On Mon, Nov 2, 2009 at 10:00 PM, Steve Ellington <[hidden email]
>> > wrote:
>>> Press and hold XMIT to activate tune. It makes a beep. Press
>>> again, it makes
>>> another beep. Loudness depends upon mon setting. FW is ver. 3.52
>>> also
>>> Steve
>>> N4LQ
>>> [hidden email]
>>> ----- Original Message -----
>>> From: "DC1RS" <[hidden email]>
>>> To: <[hidden email]>
>>> Sent: Monday, November 02, 2009 3:25 PM
>>> Subject: Re: [Elecraft] [K3] K3 BEEP BEEP BEEP
>>>
>>>
>>>>
>>>>
>>>> Steve Ellington wrote:
>>>>>
>>>>>
>>>>> ...if I push the "TUNE" button I will wake up everyone...
>>>>>
>>>>>
>>>>
>>>> What FW-Version are you using?
>>>> Pressing the "TUNE" button here with FW 3.52 no sidetone is
>>>> audible.
>>>>
>>>> 73 de Roland, DC1RS
>>>>
>>>> -----
>>>> K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K,
>>>> KFL3A-400,
>>>> KAT3, KXV3A
>>>> --
>>>> View this message in context:
>>>> http://n2.nabble.com/K3-BEEP-BEEP-BEEP-tp3932363p3934422.html
>>>> Sent from the [K3] mailing list archive at Nabble.com.
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:[hidden email]
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>>> --------------------------------------------------------------------------------
>>>
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 9.0.698 / Virus Database: 270.14.45/2476 - Release Date:
>>> 11/02/09
>>> 02:51:00
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html