K3 CW power higher than tune power pse help

[Klaus Koppendorfer]

Since few weeks i saw that k3 power goes up more than 100 watts
So I did new wmtr-hp calibration compare with my LP100A
The value for wmtr-hp has to set up to 160  for 50 Watts cal with "tune"
When I use cw the  power goes from 50 watts up to 65 watts
I can read this power difference with lp100a on k3 rf-bars and also on kpa500 power-leds

Has anyone an idea what could have gone wrong in my k3
What can I measure inside on swr-bridge ??

73
Klaus
OE6KYG
KX1 #244
K1 #2135
K2 #1331
KX3 #462
K3 #115
P3 #469
KPA500 #94
KAT500

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Urb LeJeune]

Hi

I have a 100 Watt K3. When I adjust the PWR know it only goes up to 12.0 watts.
How do I activate the 100 watts? I know I'm overlooking a setting
somewhere but
I'll be darned if I can find it.

Thanks

73 Urb W1UL


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Mike Markowski-2]

Hi Urb,

Probably CONFIG -> PA is set to BYPass.  Change it to NORmal and you'll
have your PA inline!

73,
Mike ab3ap

On 10/12/2014 10:48 AM, Urb LeJeune wrote:
> Hi
>
> I have a 100 Watt K3. When I adjust the PWR know it only goes up to
> 12.0 watts. How do I activate the 100 watts? I know I'm overlooking a
> setting somewhere but I'll be darned if I can find it.
>
> Thanks
>
> 73 Urb W1UL
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

Set CONFIG:KPA3 -> PA nor

73,

    ... Joe, W4TV


On 2014-10-12 10:48 AM, Urb LeJeune wrote:

> Hi
>
> I have a 100 Watt K3. When I adjust the PWR know it only goes up to 12.0
> watts.
> How do I activate the 100 watts? I know I'm overlooking a setting
> somewhere but
> I'll be darned if I can find it.
>
> Thanks
>
> 73 Urb W1UL
>
>
> ---
> This email is free from viruses and malware because avast! Antivirus
> protection is active.
> http://www.avast.com
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]