K3 CW spot feature

[George-122]

Maybe it's just me, but the spot feature seems less accurate than previously.  Using 2.02 and dsp 1.77.  

Anyone else notice this?

73,
George, N4Ym
K3# 340
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Peter Howson]

---------- Maybe it's just me, but the spot feature seems less accurate than
previously.  Using 2.02 and dsp 1.77.  

Anyone else notice this? --------

Yes, I have. There is now no CWT indication on signals below S9+. No doubt this
will be cleared up in the next release.

Peter
GM8GAX


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Larry Naumann]

I notice the same thing, it seems to not work quite as well as before. The tune indicator seems to not lock on as well either, which makes sense as they are both tied together.
Larry  N0SA

George-122 wrote

Maybe it's just me, but the spot feature seems less accurate than previously.  Using 2.02 and dsp 1.77.  

Anyone else notice this?

73,
George, N4Ym
K3# 340
_______________________________________________
Elecraft mailing list
Post to: [e-mail]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[John Klewer]

OK....does anyone else have this same operational quirk?

Using latest beta firmware (same problem existed using the latest
released FW as well) I have a XV-144 connected to my K3...set output
power on 6 meters set to about 60 watts (actual value is irrelevant),
switch to 144 MHz, switch back to 6 meters....now output power is 3.7W!

This happens repeatably....

Any one else with an XV-144 care to try this and report back?

Any suggestions?

Thanks

John, N6AX
K3 567

>>    
>>
>
>  
>
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[dave.wilburn]

I ended up playing with some of the AGC / audio settings, as I had not
messed with them, since I initially played with them when I got the
rig.  But CWT is working fine, used it a lot yesterday.  I did notice
initially, after the firmware update, that I adjusted the threshold a
notch or too, but that is all it took.

David Wilburn
K4DGW



Larry Naumann wrote:

> I notice the same thing, it seems to not work quite as well as before. The
> tune indicator seems to not lock on as well either, which makes sense as
> they are both tied together.
> Larry  N0SA
>
>
>
> George-122 wrote:
>> Maybe it's just me, but the spot feature seems less accurate than
>> previously.  Using 2.02 and dsp 1.77.  
>>
>> Anyone else notice this?
>>
>> 73,
>> George, N4Ym
>> K3# 340
>> _______________________________________________
>> Elecraft mailing list
>> Post to: [hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com