K3 Conflict with amp and Signalink

[K5HM]

The Signalink USB and the keying line for the linear amp both use the Key
Out port on the K3.  Is there a solution that would not require unplugging
the Signalink sound card?

73,
Ron, K5HM
[hidden email]
www.qrz.com/db/k5hm



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Ron,

I have looked at the SignaLink USB information and see *no* connection
for the KEYOUT line.  Yes, the SignaLink needs to be connected to the
Line Out on the K3, but that is different than KEYOUT (PTT to the
amplifier).

73,
Don W3FPR

On 5/25/2013 6:27 PM, K5HM wrote:
> The Signalink USB and the keying line for the linear amp both use the Key
> Out port on the K3.  Is there a solution that would not require unplugging
> the Signalink sound card?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[KC6CNN]

CONTENTS DELETED

The author has deleted this message.

[K5HM]

I rechecked the Signalinlk cable and connected the PTT to PTT IN on the K3.
Works correctly.  It worked before, so I must have been dreaming about where
I had it connected.  

Probably senior moment.  Thanks to all.    

73,
Ron, K5HM
[hidden email]
www.qrz.com/db/k5hm

________________________________________
From: Gerald Manthey [mailto:[hidden email]]
Sent: Saturday, May 25, 2013 6:55 PM
To: K5HM
Cc: [hidden email]
Subject: Re: [Elecraft] K3 Conflict with amp and Signalink

I have all those and can confirm the Signalink does not use key out.
Gerald
On May 25, 2013 5:28 PM, "K5HM" <[hidden email]> wrote:
The Signalink USB and the keying line for the linear amp both use the Key
Out port on the K3.  Is there a solution that would not require unplugging
the Signalink sound card?

73,
Ron, K5HM
[hidden email]
www.qrz.com/db/k5hm



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html