Elecraft

K3 DATA A

Classic

List

Threaded

4 messages Options

k6dgw

K3 DATA A

I'm sure this must be somewhere in the K3 Manual or KE7X book, but I
can't find it:

Are the TX and RX equalizers disabled in DATA A? In AFSK A?

I know DATA A sets CMP=0, and I think it sets MIC+LIN=OFF automatically.
Just getting started on JT65 and both my TX and RX EQ are set for SSB
and I don't want to change them.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2014 Cal QSO Party 4-5 Oct 2014
- www.cqp.org

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

k5oai

Re: K3 DATA A

E740107 K3 Owners Man D10.pdf
page 35
Receive Audio Equalization (EQ)

"Two receive EQ setups are provided: one for CW
mode, and the other for voice modes. RX EQ does
not apply to DATA modes."

and the RX EQ is accomplished by where you have the LO and HI set
that's the determining factor for the audio frequencies that are passed

===

E740107 K3 Owners Man D10.pdf
page 35
Transmit Audio Equalization (EQ)

Two transmit EQ setups are provide: one for SSB,
the other for wideband voice modes (ESSB, AM,
FM). TX EQ is not applicable to CW or DATA
modes.

On 10/13/2013 4:56 PM, Fred Jensen wrote:

--

GB & 73
K5OAI
Sam Morgan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Joe Subich, W4TV-4

Re: K3 DATA A

In reply to this post by k6dgw

> Are the TX and RX equalizers disabled in DATA A? In AFSK A?

Yes.

> I know DATA A sets CMP=0, and I think it sets MIC+LIN=OFF
> automatically.

DATA A and AFSK A do not automatically set MIC+LIN=OFF. However,
MIC+LIN *IS* set OFF if you select MENU:MIC SEL=LInE In.

73,

... Joe, W4TV

On 10/13/2013 5:56 PM, Fred Jensen wrote:

> I'm sure this must be somewhere in the K3 Manual or KE7X book, but I
> can't find it:
>
> Are the TX and RX equalizers disabled in DATA A? In AFSK A?
>
> I know DATA A sets CMP=0, and I think it sets MIC+LIN=OFF automatically.
> Just getting started on JT65 and both my TX and RX EQ are set for SSB
> and I don't want to change them.
>
> 73,
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2014 Cal QSO Party 4-5 Oct 2014
> - www.cqp.org
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

k6dgw

Re: K3 DATA A

In reply to this post by k5oai

Thanks Sam, I'm old, I like manuals that lay flat on the desk because I
tend to write in them, but I think I'm going to have to download the
manual in searchable PDF.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2014 Cal QSO Party 4-5 Oct 2014
- www.cqp.org

On 10/13/2013 4:00 PM, Sam Morgan wrote:

> E740107 K3 Owners Man D10.pdf
> page 35
> Receive Audio Equalization (EQ)
>
> "Two receive EQ setups are provided: one for CW
> mode, and the other for voice modes. RX EQ does
> not apply to DATA modes."
>
> and the RX EQ is accomplished by where you have the LO and HI set
> that's the determining factor for the audio frequencies that are passed
>
> ===
>
> E740107 K3 Owners Man D10.pdf
> page 35
> Transmit Audio Equalization (EQ)
>
> Two transmit EQ setups are provide: one for SSB,
> the other for wideband voice modes (ESSB, AM,
> FM). TX EQ is not applicable to CW or DATA
> modes.