As per owners manual
Transmit gain constant out of range.
This usually indicates a problem with band-pass filter alignment or one of
the low-pass filters. In either case it could affect one or two bands. See
service manual.
(just been working on
<
http://www.zerobeat.net/mediawiki/index.php/K3_Firmware_Error_codes> :)
On 30/12/07 13:10, "Rowland" <
[hidden email]> sent:
> I have installed my Xmas present the KPA3 into K3 36
> All seems to be OK apart from an error message, ERR TXG on the 30m band
> only.
> Other bands seem OK and acting as should.
> When trying to transmit into a dummy load 50Ohm I get no power out and
> hear a 200Hz or so whine coming from the rig.
>
> The manual says that usually indicates a problem with band-pass foilter
> alignment or one of the low pass filters. See Service manual.
>
> Anyone any ideas please.
> I guess elecraft tech help not available today.
>
> Thanks
> Rowland
> G4APO
--
The high minded man must care more for the truth than for what people
think. -Aristotle, philosopher (384-322 BCE)
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
