K3: ERR TXG

[David Pratt-2]

I am getting an ERR TXG error message when attempting to calibrate the
power on 60 meters. This happens at both the 5W and 50W calibration
points.  All the other bands are OK.

Although page 46 of the Owner's Manual does not specify, I am doing the
power calibration at the bottom end of each band.  On 60 meters the
bottom of the lowest channel is 5258.5 kHz in the UK.

Is anyone else having this problem?  If so, how can the problem be
remedied?

73

David G4DMP
K3: s/n 00168
--
David G4DMP
Leeds, England, UK
------


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[dj7mgq]

Hallo David,

 > I am getting an ERR TXG error message when attempting to calibrate the
 > power on 60 meters. This happens at both the 5W and 50W calibration
 > points.  All the other bands are OK.

Try a higher frequency. I also had the same problem at the bottom of the
60m band, but I don't know any more which frequency I tried first, and
which second.

vy 73 de toby
--
DD5FZ (ex 4n6fz, dj7mgq, dg5mgq, dd5fz)
K2/10  #885
K2/100 #3248
K3/100 #67
DOK C12, BCC, DL-QRP-AG, JN58td
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Greg - AB7R]

David,

Please try doing the calibration on one of the 60M channels.  Try 5403.5 kHz.


-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065
K3#0009

On Tue Jan 29 14:02 , David Pratt  sent:

>I am getting an ERR TXG error message when attempting to calibrate the
>power on 60 meters. This happens at both the 5W and 50W calibration
>points.  All the other bands are OK.
>
>Although page 46 of the Owner's Manual does not specify, I am doing the
>power calibration at the bottom end of each band.  On 60 meters the
>bottom of the lowest channel is 5258.5 kHz in the UK.
>
>Is anyone else having this problem?  If so, how can the problem be
>remedied?
>
>73
>
>David G4DMP
>K3: s/n 00168
>--
>David G4DMP
>Leeds, England, UK
>------
>
>
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com