K3 ERR TXG

[Dick Grolleman]

Hi All

Just completed my K3 SN:1168 last night. Now doing the calibration I ran into the folling problem. Everything went fine until I did get to the transmitter gain part.
on 160 to 30 m it says ERR TXG. I puts out 1.1 to 3 watts on these bands. On the higher bands it's ok.
I started all over again, but hte problem does exists. Selected filter for transmit is 2.7 so thats not the problem. I did set the offset correct. -0.86. Can't figure out what is wrong.
Any help? please

73 de Dick PA3FQA
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[M0XDF]

Sounds like you've done the right things, but double check
http://www.zerobeat.net/mediawiki/index.php/Firmware_Error_codes#ERR_TXG
just in case and please come back to us with the resolution, when you  
have one.
--
Extraordinary claims require extraordinary evidence.
-Carl Sagan, astronomer and author (1934-1996)

On 12 Jul 2008, at 10:38, Dick Grolleman wrote:

> Hi All
>
> Just completed my K3 SN:1168 last night. Now doing the calibration I  
> ran into the folling problem. Everything went fine until I did get  
> to the transmitter gain part.
> on 160 to 30 m it says ERR TXG. I puts out 1.1 to 3 watts on these  
> bands. On the higher bands it's ok.
> I started all over again, but hte problem does exists. Selected  
> filter for transmit is 2.7 so thats not the problem. I did set the  
> offset correct. -0.86. Can't figure out what is wrong.
> Any help? please

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[K4HR]

Same issues with S/N 1165, changed LPA but still having issues.

Lew

Dick Grolleman wrote

Hi All

Just completed my K3 SN:1168 last night. Now doing the calibration I ran into the folling problem. Everything went fine until I did get to the transmitter gain part.
on 160 to 30 m it says ERR TXG. I puts out 1.1 to 3 watts on these bands. On the higher bands it's ok.
I started all over again, but hte problem does exists. Selected filter for transmit is 2.7 so thats not the problem. I did set the offset correct. -0.86. Can't figure out what is wrong.
Any help? please

73 de Dick PA3FQA
_______________________________________________
Elecraft mailing list
Post to: [e-mail]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com