K3 FT8 WSJT-X Setup

[William Liporace - WC2L]

Good Morning,
I have been looking and without success been able to get the K3 to TX on
FT8. I do have the Enhanced I/O board installed, so single USB
connection to the radio. I have it decoding very well. I have tried USB
and DATA A. Can someone point me in the right direction??

PC is Windows 10. WXJT-X c 1.90 RC4.

TNX Will WC2L

--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
[hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Will,

Does the K3 go into transmit?  If so, set the audio levels correctly.
You must achieve 4 bars solid on the ALC meter with the 5th bar
flashing.  There are guidelines for doing that on my website www.w3fpr.com.
Scroll to the bottom article in the left column and click on the link.

73,
Don W3FPR

On 5/24/2018 6:38 AM, William Liporace wrote:

> Good Morning,
> I have been looking and without success been able to get the K3 to TX on
> FT8. I do have the Enhanced I/O board installed, so single USB
> connection to the radio. I have it decoding very well. I have tried USB
> and DATA A. Can someone point me in the right direction??
>
> PC is Windows 10. WXJT-X c 1.90 RC4.
>
> TNX Will WC2L
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[William Liporace - WC2L]

Thanks to Dave N4DB for the tip!! It was just the MIC gain level. I can
now TX. So hopefully I am on my way!!
TNX Will WC2L


On 5/24/2018 6:38 AM, William Liporace wrote:

> Good Morning,
> I have been looking and without success been able to get the K3 to TX
> on FT8. I do have the Enhanced I/O board installed, so single USB
> connection to the radio. I have it decoding very well. I have tried
> USB and DATA A. Can someone point me in the right direction??
>
> PC is Windows 10. WXJT-X c 1.90 RC4.
>
> TNX Will WC2L
>

--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
[hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]