K3 Filter Selection
Locked
 
|
Greetings, Just got my new K3 options in Monday and
had them all installed by Tuesday morning. I installed 3 of the 4 possible optional roofing filters. They have been turned on and the BW set in config. My problem is when I power down the radio they cannot be called up by tapping the XFIL button. I have to go into the config and call them up to verify they are there and then out of config. Once done I can call them up with a XFIL tap. Any hints or ideas of what I am missing? TIA es 73, Mike Mike Sanders KØAZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Well, Never mind. Thanks anyway. I did NOT have
them turned on in all modes. It seems since I did that they work just fine after a power down. More questions to follow I am sure. 73 Mike Sanders KØAZ -----Original Message----- From: [hidden email] [mailto:[hidden email]]On Behalf Of Mike Sanders Sent: Wednesday, August 29, 2012 7:40 AM To: Elecraft Reflector Subject: [Elecraft] K3 Filter Selection Greetings, Just got my new K3 options in Monday and had them all installed by Tuesday morning. I installed 3 of the 4 possible optional roofing filters. They have been turned on and the BW set in config. My problem is when I power down the radio they cannot be called up by tapping the XFIL button. I have to go into the config and call them up to verify they are there and then out of config. Once done I can call them up with a XFIL tap. Any hints or ideas of what I am missing? TIA es 73, Mike Mike Sanders KØAZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ----- No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1424 / Virus Database: 2437/5231 - Release Date: 08/28/12 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
In reply to this post by Mike Sanders
I never use the XFIL buttons. I dial the bandwidth I want by twisting the
"width" knob just to the left of VFO A. Or I tap the "LOW" knob to normalize the settings for CW or phone. 73 de Dick, K6KR -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Mike Sanders Sent: Wednesday, August 29, 2012 5:40 AM To: Elecraft Reflector Subject: [Elecraft] K3 Filter Selection Greetings, Just got my new K3 options in Monday and had them all installed by Tuesday morning. I installed 3 of the 4 possible optional roofing filters. They have been turned on and the BW set in config. My problem is when I power down the radio they cannot be called up by tapping the XFIL button. I have to go into the config and call them up to verify they are there and then out of config. Once done I can call them up with a XFIL tap. Any hints or ideas of what I am missing? TIA es 73, Mike Mike Sanders KØAZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
> Or I tap the "LOW" knob to normalize the settings for CW or phone. Of course you mean *hold* the LOW knob ... It would be handy if *hold* would normalize at 2.8 KHz bw in DATA A and 400 Hz in AFSK A/FSK D for data modes. Normalizing to 400 Hz in DATA A is a problem. 73, ... Joe, W4TV On 8/29/2012 9:26 AM, Dick Dievendorff wrote: > I never use the XFIL buttons. I dial the bandwidth I want by twisting the > "width" knob just to the left of VFO A. Or I tap the "LOW" knob to > normalize the settings for CW or phone. > > 73 de Dick, K6KR > > > > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]] On Behalf Of Mike Sanders > Sent: Wednesday, August 29, 2012 5:40 AM > To: Elecraft Reflector > Subject: [Elecraft] K3 Filter Selection > > Greetings, Just got my new K3 options in Monday and had them all installed > by Tuesday morning. I installed > 3 of the 4 possible optional roofing filters. They have been turned on and > the BW set in config. My problem is when I power down the radio they cannot > be called up by tapping the XFIL button. I have to go into the config and > call them up to verify they are there and then out of config. Once done I > can call them up with a XFIL tap. Any hints or ideas of what I am missing? > TIA es 73, Mike > > > > Mike Sanders > KØAZ > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |