[K3] How to read FW version

[dj7mgq]

Hallo,

I could not find anything in the documentation, but maybe I missed it...

How can one display which firmware versions are installed?
What is the command for an external control program?

vy 73 de toby

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[David Fleming-2]

It's in the manual. Config Menu - FW REVS

David, W4SMT

--- [hidden email] wrote:

> Hallo,
>
> I could not find anything in the documentation, but
> maybe I missed it...
>
> How can one display which firmware versions are
> installed?
> What is the command for an external control program?
>
> vy 73 de toby
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Thomas Norff]

Moin Toby,

you can find this information under  'config' 'fw revs'... with VFO-A you
can step through MCU,DSP,...

This is only available with 'for development only' commands

        RVM => MCU
        RVD => DSP1
        RVA => ?
        RVV => ?
        RVF => ?

These commmands are used during the software initialization procedure... i
like portsniffer...

Thomas, DM7TN

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of
[hidden email]
Sent: Monday, November 26, 2007 4:52 PM
To: Elecraft Mailing List
Subject: [Elecraft] [K3] How to read FW version

Hallo,

I could not find anything in the documentation, but maybe I missed it...

How can one display which firmware versions are installed?
What is the command for an external control program?

vy 73 de toby

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Simon (HB9DRV)]

For software you have to use MN to display the correct entry from the CONFIG
menu, then use DB (I think) to read the text displayed in the VFO-B area.
When finished send MN255; to get out of MN mode.

I have already implemented this and can confirm that it works OK.

Simon Brown, HB9DRV

----- Original Message -----
From: <[hidden email]>

> What is the command for an external control program?

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com