K3 K POD macros

[Jeff Griffin]

I'm happily writing some macros for my K Pod and not finding a way to access
front panel controls like M1. Is there a way to access M1 from the K POD?
Also does anyone have a macro to share that emulates a band select function?
Thanks.

 

73 Jeff kb2m

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Jeff,

Most all the K3 buttons are accessible through the macro SWT/SWH commands.
See page 17 of the Programmers Reference.  Specifically SWT21 is a tap
of the M1 button and SWH21 is a hold.

Store the macro in the K3 (the latest K3 Utility allows 16 macros to be
edited/stored).
Then one of the K-Pod buttons can activate than macro.

73,
Don W3FPR

On 7/19/2016 10:51 AM, Jeff Griffin wrote:
> I'm happily writing some macros for my K Pod and not finding a way to access
> front panel controls like M1. Is there a way to access M1 from the K POD?
> Also does anyone have a macro to share that emulates a band select function?
> Thanks.
>
>  
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Dick Dievendorff-4]

You can tap or hold buttons like M1 with SWT or SWH.
Change bands with BN.  

Dick, K6KR

> On Jul 19, 2016, at 07:51, Jeff Griffin <[hidden email]> wrote:
>
> I'm happily writing some macros for my K Pod and not finding a way to access
> front panel controls like M1. Is there a way to access M1 from the K POD?
> Also does anyone have a macro to share that emulates a band select function?
> Thanks.
>
>
>
> 73 Jeff kb2m
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jeff Griffin]

Thanks to all for the macro help. Like a good boy I found the time to read
more slowly through the programmers reference and all is now well. Only
problem I have now is trying to remember what macro is associated with what
button, and is it tap or hold???  

73 Jeff kb2m


I'm happily writing some macros for my K Pod and not finding a way to access
front panel controls like M1. Is there a way to access M1 from the K POD?
Also does anyone have a macro to share that emulates a band select function?
Thanks.

 

73 Jeff kb2m


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

['DGB']

I use some small yellow labels printed off a Brother P-Touch alongside
each button. Also use those labels on all the wires in my wireless
station here! ;-)

73 Dwight NS9I


On 7/20/2016 7:02 AM, Jeff Griffin wrote:

> Thanks to all for the macro help. Like a good boy I found the time to read
> more slowly through the programmers reference and all is now well. Only
> problem I have now is trying to remember what macro is associated with what
> button, and is it tap or hold???
>
> 73 Jeff kb2m
>
>
> I'm happily writing some macros for my K Pod and not finding a way to access
> front panel controls like M1. Is there a way to access M1 from the K POD?
> Also does anyone have a macro to share that emulates a band select function?
> Thanks.
>
>  
>
> 73 Jeff kb2m
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]