K3 K144XV frequency accuracy

[Roger Banks]

Hi Guys
I am using my lovely shiny new, factory built K3 with built in K144XV on DATA mode on 2m for FSK441 using WSJT. It 'seems' that the display frequency is about 200Hz high compared to most other stations.
Is there someway I can check/adjust the output frequency on 2 metres??? What is the displayed freqency on DATA mode anyway - zero beat?
Roger Banks
GW4WND

[Richard Ferch]

The displayed frequency in DATA modes depends on the DATA sub-mode.
Assuming you are using the DATA A sub-mode for WSJT, the displayed
frequency will be the suppressed carrier frequency, the same as it would
be if you were using USB mode.

73,
Rich VE3KI

GW4WND wrote:

> What
> is the displayed freqency on DATA mode anyway - zero beat?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Oliver Dröse]

Hi Roger,

for WSJT (AFSK A) it is the "zero beat" frequency, i.e. the same as in USB.
Concerning frequency display you can adjust that in the menu, see under "set
transverter offset" in the manual.

73 & gl, Olli - DH8BQA (K3 #4546)



----- Original Message -----
From: "Roger Banks" <[hidden email]>
To: <[hidden email]>
Sent: Friday, June 17, 2011 3:40 PM
Subject: [Elecraft] K3 K144XV frequency accuracy

> Hi Guys
> I am using my lovely shiny new, factory built K3 with built in K144XV on
> DATA mode on 2m for FSK441 using WSJT. It 'seems' that the display
> frequency
> is about 200Hz high compared to most other stations.
> Is there someway I can check/adjust the output frequency on 2 metres???
> What
> is the displayed freqency on DATA mode anyway - zero beat?
> Roger Banks
> GW4WND
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/K3-K144XV-frequency-accuracy-tp6487141p6487141.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> eMail ist virenfrei.
> Von AVG uberpruft - www.avg.de
> Version: 10.0.1382 / Virendatenbank: 1513/3707 - Ausgabedatum: 16.06.2011
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Roger Banks]

Yes - thank you guys.
The factory offsets for the tvtr unit seem to have been set for the 146 band not 144. Now corrected this in Config and we are all OK.
73
Roger
GW4WND