K3 KX3 running winmor

[John Hendricks-2]

I run Winmor on my K3 & KX3 and find it very frustrating that Winmor resets the mode back to SSB with each automatic frequency change. I need the mode to be set to DATA A so that the compression & Equalizers are disabled, ALC is optimized, and for the K3 the rear panel connectors are enabled. Are there other Winmor user that would like to see the WL2K development group make some changes to fix this problem?

John Hendricks K7JLT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Tim Tucker]

I know that it's "best practice" to use DATA A mode for digital, but I use
Winmor all the time in SSB mode and don't run into any problems.  I don't
even bother turning off the compression and EQ, either.  Have you tried it
this way, and if so what has your experience been?

Tim
AE6LX



On Fri, May 16, 2014 at 7:54 AM, K7JLTextra <[hidden email]> wrote:

> I run Winmor on my K3 & KX3 and find it very frustrating that Winmor
> resets the mode back to SSB with each automatic frequency change. I need
> the mode to be set to DATA A so that the compression & Equalizers are
> disabled, ALC is optimized, and for the K3 the rear panel connectors are
> enabled. Are there other Winmor user that would like to see the WL2K
> development group make some changes to fix this problem?
>
> John Hendricks K7JLT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

--
Owner, worldwidedx.com
AE6LX, Amateur Radio
NNN0ITA, Navy MARS
NNN0GAF FOUR, Southern CA Director Assistant for Training, Navy MARS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bill Noyce]

John Hendricks K7JLTsays:

> run Winmor on my K3 & KX3 and
> find it very frustrating that Winmor
> resets the mode back to SSB with
> each automatic frequency change.

If you're using Winmor through RMS Express, go into Rig Configuration in a
Winmor session.  Make sure you have selected "Elecraft K3/KX3" and select
"USB Digital" as the mode.  Make sure you have the most current version;
there was a version a couple of months ago that didn't distinguish K3 from
K3/KX3, with the result that this commanded LSB on the K3 and KX3.

  -- Bill, AB1AV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[W4JBB]

Hmm... I don't seem to have this issue with my K3. I use RMSExpress and
WINMOR on both amateur bands and MARS frequencies.

Make sure you're running the latest version of RMSExpress and WINMOR.
There was an issue with a version released since the beginning of the
year where the radio would go into USB mode instead of DATA A.

73,
Joel - W4JBB

On 5/16/14, 9:54 AM, K7JLTextra wrote:

> I run Winmor on my K3 & KX3 and find it very frustrating that Winmor resets the mode back to SSB with each automatic frequency change. I need the mode to be set to DATA A so that the compression & Equalizers are disabled, ALC is optimized, and for the K3 the rear panel connectors are enabled. Are there other Winmor user that would like to see the WL2K development group make some changes to fix this problem?
>
> John Hendricks K7JLT
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Frank Precissi]

I'm running RMSExpress 1.2.27.0 / WINMOR 1.5.7.0 and I'm seeing the same
problem.  It clicks the K3 over to USB mode instead of DATA mode.  USB
Digital is selected in WINMOR setup too.

The bug was reported back in Jan (I believe) and from what I can see it
hasn't been fixed.

Frank
KG6EYC


On Fri, May 16, 2014 at 4:55 PM, Joel Black <[hidden email]> wrote:

> Hmm... I don't seem to have this issue with my K3. I use RMSExpress and
> WINMOR on both amateur bands and MARS frequencies.
>
> Make sure you're running the latest version of RMSExpress and WINMOR.
> There was an issue with a version released since the beginning of the year
> where the radio would go into USB mode instead of DATA A.
>
> 73,
> Joel - W4JBB
>
>
> On 5/16/14, 9:54 AM, K7JLTextra wrote:
>
>> I run Winmor on my K3 & KX3 and find it very frustrating that Winmor
>> resets the mode back to SSB with each automatic frequency change. I need
>> the mode to be set to DATA A so that the compression & Equalizers are
>> disabled, ALC is optimized, and for the K3 the rear panel connectors are
>> enabled. Are there other Winmor user that would like to see the WL2K
>> development group make some changes to fix this problem?
>>
>> John Hendricks K7JLT
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

--
CW: NAQCC #6554 | SKCC #10435 | FISTS #16155 | SOC #1038 | FPQRP #3186
Digital: FHC #4224 | 30MDG #6370 | DMC #5698
Gear: K3 #7164 | P3 #3134 | KX3 #1787
http://vadept.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Matt Zilmer-3]

Rick Muething reported his team would fix this problem "real soon now"
in Feb.

Someone decided that having the "USB Digital" button was a bad idea,
so they removed the option, or broke it.

The solution I use is a workaround.  Wait for the end of the first TX,
then change the mode to DATA A.  I used a macro for this.  The mode is
only set just prior to the first TX.

73,
matt W6NIA / NNN0UET

On Fri, 16 May 2014 22:41:48 -0700, you wrote:

>I'm running RMSExpress 1.2.27.0 / WINMOR 1.5.7.0 and I'm seeing the same
>problem.  It clicks the K3 over to USB mode instead of DATA mode.  USB
>Digital is selected in WINMOR setup too.
>
>The bug was reported back in Jan (I believe) and from what I can see it
>hasn't been fixed.
>
>Frank
>KG6EYC
>
>
>On Fri, May 16, 2014 at 4:55 PM, Joel Black <[hidden email]> wrote:
>
>> Hmm... I don't seem to have this issue with my K3. I use RMSExpress and
>> WINMOR on both amateur bands and MARS frequencies.
>>
>> Make sure you're running the latest version of RMSExpress and WINMOR.
>> There was an issue with a version released since the beginning of the year
>> where the radio would go into USB mode instead of DATA A.
>>
>> 73,
>> Joel - W4JBB
>>
>>
>> On 5/16/14, 9:54 AM, K7JLTextra wrote:
>>
>>> I run Winmor on my K3 & KX3 and find it very frustrating that Winmor
>>> resets the mode back to SSB with each automatic frequency change. I need
>>> the mode to be set to DATA A so that the compression & Equalizers are
>>> disabled, ALC is optimized, and for the K3 the rear panel connectors are
>>> enabled. Are there other Winmor user that would like to see the WL2K
>>> development group make some changes to fix this problem?
>>>
>>> John Hendricks K7JLT
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to [hidden email]
>>>
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>

Matt Zilmer, W6NIA
--
"Give me six hours to chop down a tree and I will
spend the first four sharpening the axe." -A. Lincoln
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]