K3 Line-Out help needed

[WB6DJI]

Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3.
Do I need to turn something on in the K3 Menu ??
If I plug into front Headphone Jack on K3, it works.
I need a independent Audio Line-Out that is nottied to the front panel volume control.
Thanks in advance.
SN# >8000 Firmware 5.14
Mike 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Cady, Fred]

Hi Mike,
Check the CONFIG:LIN OUT value.  It should be about 10 or so.  When you are in that menu tap the 1 key to make sure it isn’t =Phones.
Good luck.
73,
Fred KE7X

Author of:
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 – Going for the summit"
“The Elecraft KPA500 and KAT500 – the K-Line Dream Station”
Printed, coil bound copies of these are all available at www.elecraft.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide
KAT500 and KXPA500 Tuner Operation
http://www.ke7x.com/home/kat500-and-kxpa100-tuners
and brand new
“The Elecraft KXPA100, PX3 and 2M/4M Transverters – Assembling the KX3-Line Station” available at www.lulu.com.

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of Michael Aust
Sent: Saturday, June 06, 2015 11:34 PM
To: [hidden email]
Subject: [Elecraft] K3 Line-Out help needed

Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3.
Do I need to turn something on in the K3 Menu ??
If I plug into front Headphone Jack on K3, it works.
I need a independent Audio Line-Out that is nottied to the front panel volume control.
Thanks in advance.
SN# >8000 Firmware 5.14
Mike 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[WB6DJI]

Got it to work, my Line-Out needed to increase to 022 instead of 010 to make it workThanks Mike


     On Saturday, June 6, 2015 11:12 PM, "[hidden email]" <[hidden email]> wrote:
   

 Check the setting of LIN OUT in the config menu. Try NOR 010.

GL - Steve WB6RSE


On Jun 6, 2015, at 10:33 PM, Michael Aust <[hidden email]> wrote:

Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3.
Do I need to turn something on in the K3 Menu ??
If I plug into front Headphone Jack on K3, it works.
I need a independent Audio Line-Out that is nottied to the front panel volume control.
Thanks in advance.
SN# >8000 Firmware 5.14
Mike



 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Ed Muns]

What level is LIN OUT set to in the CONFIG menu?
73,
Ed W0YK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[WB6DJI]

My Line-Out level on my K3 was too low, was Set to level of 010
had to increase higher to make things work to level > 022
Thanks.
73 Mike

--------------------------------------------
On Sun, 6/7/15, Ed Muns <[hidden email]> wrote:

 Subject: Re: [Elecraft] K3 Line-Out help needed
 To: "Michael Aust" <[hidden email]>
 Cc: [hidden email]
 Date: Sunday, June 7, 2015, 6:39 AM
 
 What level is LIN OUT set
 to in the CONFIG menu?73,Ed
 W0YKOn Jun 6,
 2015 10:33 PM, Michael Aust <[hidden email]>
 wrote:
 Have an Elecraft K3 here.When I try to get Audio
 from the Line-Out for CW, to feed into a computer, I
 get no Audio Out, tried Mono and Stereo Outputson my K3.
 
 Do I need to turn something on in the K3 Menu ??
 
 If I plug into front Headphone Jack on K3, it works.
 
 I need a independent Audio Line-Out that is nottied to the
 front panel volume control.
 
 Thanks in advance.
 
 SN# >8000 Firmware 5.14
 
 Mike 
 ______________________________________________________________
 
 Elecraft mailing list
 
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 
 Help: http://mailman.qth.net/mmfaq.htm
 
 Post: mailto:[hidden email]
 This list hosted by: http://www.qsl.net
 
 Please help support this email list:
 http://www.qsl.net/donate.html
 
 Message delivered to [hidden email]
 
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[W4GRJ]

For Sale K3 serial 3746 (Not K3S) Factory Assembled

K3/100
KAT3
KRX3
KXF3A
2- KF3A 2.8k 8pole filter
KFL3A 1.8k 8pole filter
KFL3A 400 8pole filter
KFL3A 6k 8pole filter
KFL3B 13k FM filter

$3650 includes shipping and insurance

P3 serial 1020 Factory assembled
$635

All perfect condition, non smoking environment. Prefer to sell K3 & P3 as
package, will include associated interconnect cables.

Please reply offline.
Tnx,
Jack
W4GRJ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[W4GRJ]

For Sale K3 serial 3746 (Not K3S) Factory Assembled

K3/100
KAT3
KRX3
KXF3A
2- KF3A 2.8k 8pole filter
KFL3A 1.8k 8pole filter
KFL3A 400 8pole filter
KFL3A 6k 8pole filter
KFL3B 13k FM filter

$3450 includes shipping and insurance

P3 serial 1020 Factory assembled
$635

All perfect condition, non smoking environment. Prefer to sell K3 & P3 as
package, will include associated interconnect cables.

Please reply offline.
Tnx,
Jack
W4GRJ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[W4GRJ]

P3 is sold
Jack
W4GRJ

On Jun 7, 2015, at 8:56 PM, w4grj <[hidden email]> wrote:

For Sale K3 serial 3746 (Not K3S) Factory Assembled

K3/100
KAT3
KRX3
KXF3A
2- KF3A 2.8k 8pole filter
KFL3A 1.8k 8pole filter
KFL3A 400 8pole filter
KFL3A 6k 8pole filter
KFL3B 13k FM filter

$3650 includes shipping and insurance

P3 serial 1020 Factory assembled
$635

All perfect condition, non smoking environment. Prefer to sell K3 & P3 as
package, will include associated interconnect cables.

Please reply offline.
Tnx,
Jack
W4GRJ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[W4GRJ]

For Sale K3 serial 3746 and P3 serial 1020 Both Factory Assembled

K3/100
KAT3 ATU
KRX3 2nd Rcvr
KXF3A IF out and xverter for P3
2- KF3A 2.8k 8pole filter
KFL3A 1.8k 8pole filter
KFL3A 400 8pole filter
KFL3A 6k 8pole filter
KFL3B 13k FM filter
Included associated interconnect cables
Original cost over $4700

Sell for $3785 includes mailing / insurance
All perfect condition, non smoking environment.

Please reply offline.
Tnx,
Jack
W4GRJ


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]