K3 - Mono or stereo speaker

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 - Mono or stereo speaker

Edward F. Steinfeld
I have an external speaker with a monaural plug. If I set Speakers to 1 can
I use the mono plug? The write-up is slightly confusing to me.

73,
KB1ZJK - Ed

Edward F. Steinfeld  KB1ZJK
25 Arbor Glen Drive
Stow, MA 01775-1258
Home: (978)897-3127
Cell: (978)376-3146
mailto::[hidden email]
http://www.go-embedded.com <http://www.go-embedded.com/>
http://en.wikipedia.org/wiki/Mount_Steinfeld 

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 - Mono or stereo speaker

Don Wilhelm-4
Ed,
Ed,

The answer is NO.
Even with speakers set to 1, one channel of the speaker jack is still
connected to the output of the audio amplifier.  The menu only activates
one channel, it does not change the physical connection.
Replace the plug with a stereo plug wired only to the tip and sleeve.  
That will work in both a mono jack and a stereo jack.

73,
Don W3FPR

On 3/5/2014 12:06 PM, Edward F. Steinfeld wrote:
> I have an external speaker with a monaural plug. If I set Speakers to 1 can
> I use the mono plug? The write-up is slightly confusing to me.
>
> 73,
> KB1ZJK - Ed
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 - Mono or stereo speaker

Nr4c
In reply to this post by Edward F. Steinfeld
If, and only if you have Speakers set to "1", you can use a mono plug.  DONOT set speakers to "2" with it inserted however.  Smoke will escape and you will be faced with a repair.

My rule is: NEVER plug a mono plug in the Speaker jack, EVER!

...bill nr4c

Sent from my Verizon Wireless 4G LTE DROID

"Edward F. Steinfeld" <[hidden email]> wrote:

>I have an external speaker with a monaural plug. If I set Speakers to 1 can
>I use the mono plug? The write-up is slightly confusing to me.
>
>73,
>KB1ZJK - Ed
>
>Edward F. Steinfeld  KB1ZJK
>25 Arbor Glen Drive
>Stow, MA 01775-1258
>Home: (978)897-3127
>Cell: (978)376-3146
>mailto::[hidden email]
>http://www.go-embedded.com <http://www.go-embedded.com/>
>http://en.wikipedia.org/wiki/Mount_Steinfeld 
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 - Mono or stereo speaker

ve3dvy
Actually.  If the speaker is set to one it will still send signal to the ring connection. Just mono.   Even if there is nothing going to the ring.  By using a mono plug that will short ring to sleve.  Just with the power on thump you could create a problem.  Change the connector. Leave the ring open.
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

-----Original Message-----
From: bill conkling <[hidden email]>
Sender: [hidden email]
Date: Wed, 05 Mar 2014 14:52:52
To: Edward F. Steinfeld<[hidden email]>
Cc: <[hidden email]>
Subject: Re: [Elecraft] K3 - Mono or stereo speaker

If, and only if you have Speakers set to "1", you can use a mono plug.  DONOT set speakers to "2" with it inserted however.  Smoke will escape and you will be faced with a repair.

My rule is: NEVER plug a mono plug in the Speaker jack, EVER!

....bill nr4c

Sent from my Verizon Wireless 4G LTE DROID

"Edward F. Steinfeld" <[hidden email]> wrote:

>I have an external speaker with a monaural plug. If I set Speakers to 1 can
>I use the mono plug? The write-up is slightly confusing to me.
>
>73,
>KB1ZJK - Ed
>
>Edward F. Steinfeld  KB1ZJK
>25 Arbor Glen Drive
>Stow, MA 01775-1258
>Home: (978)897-3127
>Cell: (978)376-3146
>mailto::[hidden email]
>http://www.go-embedded.com <http://www.go-embedded.com/>
>http://en.wikipedia.org/wiki/Mount_Steinfeld 
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html