Elecraft › [K3]

K3 Need_Macro_Help

Classic

List

Threaded

9 messages Options

K5DNL

K3 Need_Macro_Help

Hello all,

I would like a macro to program into M3 memory
that would take the K3 out of split mode , then
send ( UP ) in CW and return to split mode.
Would appreciate any help.

Thanks 73 Ken K5DNL

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Dick Dievendorff

Re: K3 Need_Macro_Help

I haven't tested this, but I'd start with this, assuming the radio is
already in split mode and is in CW:

SWH13;KY UP;SWH13;

SWH13; to hold the SPLIT button to return to non-split mode,
KY UP; to send "UP"
SWH13; to hold the SPLIT button to return to split mode.

Dick, K6KR

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Ken Roberson
Sent: Friday, March 12, 2010 7:52 AM
To: Elecraft Elecraft
Subject: [Elecraft] K3 Need_Macro_Help

Hello all,

I would like a macro to program into M3 memory
that would take the K3 out of split mode , then
send ( UP ) in CW and return to split mode.
Would appreciate any help.

Thanks 73 Ken K5DNL

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

wb6rse1

Re: K3 Need_Macro_Help

In reply to this post by K5DNL

There are already more than enough cops around without automating this behavior. I've been told "up" many times when split up a few hundred cycles and worked the guy exactly on his last listening frequency. Some "cops" don't know what a narrow filter is, let alone QSK.

IF you must do this, please try to send "up" only once and only when the DX isn't transmitting.

Be careful what you wish for.

73 - Steve WB6RSE

On Mar 12, 2010, at 7:52 AM, Ken Roberson wrote:

Hello all,

I would like a macro to program into M3 memory
that would take the K3 out of split mode , then
send ( UP ) in CW and return to split mode.
Would appreciate any help.

Thanks 73 Ken K5DNL

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

M0XDF

Re: K3 Need_Macro_Help

He might of course be the DX and want to remind people?
73 de M0XDF, K3 #174
--
When you want to test the depths of a stream, don't use both feet.
-Chinese Proverb

On 12 Mar 2010, at 17:33, [hidden email] wrote:

> There are already more than enough cops around without automating this behavior. I've been told "up" many times when split up a few hundred cycles and worked the guy exactly on his last listening frequency. Some "cops" don't know what a narrow filter is, let alone QSK.
>
> IF you must do this, please try to send "up" only once and only when the DX isn't transmitting.
>
> Be careful what you wish for.
>
> 73 - Steve WB6RSE
>
>
> On Mar 12, 2010, at 7:52 AM, Ken Roberson wrote:
>
> Hello all,
>
> I would like a macro to program into M3 memory
> that would take the K3 out of split mode , then
> send ( UP ) in CW and return to split mode.
> Would appreciate any help.

Bob-270

Re: K3 Need_Macro_Help

In reply to this post by K5DNL

OUCH!!! Heaven forbid this....

The UP'ers usually cause more interference that the station
did in the first place. There are enough cops already.

73,
Bob
K2TK ex KN2TKR & K2TKR

On 3/12/2010 10:52 AM, Ken Roberson wrote:

> Hello all,
>
> I would like a macro to program into M3 memory
> that would take the K3 out of split mode , then
> send ( UP ) in CW and return to split mode.
> Would appreciate any help.
>
> Thanks 73 Ken K5DNL
>
>
>
>

Fw: K3 Need_Macro_Help

AMEN to that Bob!
Willis 'Cookie' Cooke
K5EWJ

________________________________
From: Bob <[hidden email]>
To: Ken Roberson <[hidden email]>; Elecraft Reflector <[hidden email]>
Sent: Fri, March 12, 2010 12:07:00 PM
Subject: Re: [Elecraft] K3 Need_Macro_Help

OUCH!!! Heaven forbid this....

The UP'ers usually cause more interference that the station
did in the first place. There are enough cops already.

73,
Bob
K2TK ex KN2TKR & K2TKR

On 3/12/2010 10:52 AM, Ken Roberson wrote:

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

lstavenhagen

Re: Fw: K3 Need_Macro_Help

I usually hear "UP LID" and yesterday morning even heard "UP ass".
Good for initially spotting the DX if he's really weak to start with, but he's still the lid just like the guy still calling on freq.....

I agree, I wouldn't want to macro something like that unless I was the DX (I can dream I guess)...

73,
LS
W5QD

Joe Subich, W4TV-4

Re: K3 Need_Macro_Help

In reply to this post by M0XDF

> He might of course be the DX and want to remind people?

In which case he would not need the "unsplit" commands.

> > There are already more than enough cops around without
> > automating this behavior.

I agree - we certainly don't need any "auto cops." There
are far too many "kilocycle kops" doing more damage than
any possible good with their kilowatts on top of relatively
weak DX. Automating the process to put the "UP" zero beat
with the DX is particularly destructive.

73,

... Joe, W4TV

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of David
> Ferrington, M0XDF
> Sent: Friday, March 12, 2010 12:58 PM
> To: Elecraft Elecraft
> Subject: Re: [Elecraft] K3 Need_Macro_Help
>
>
> He might of course be the DX and want to remind people?
> 73 de M0XDF, K3 #174
> --
> When you want to test the depths of a stream, don't use both feet.
> -Chinese Proverb
>
> On 12 Mar 2010, at 17:33, [hidden email] wrote:
>
> > There are already more than enough cops around without
> automating this
> > behavior. I've been told "up" many times when split up a
> few hundred
> > cycles and worked the guy exactly on his last listening frequency.
> > Some "cops" don't know what a narrow filter is, let alone QSK.
> >
> > IF you must do this, please try to send "up" only once and
> only when
> > the DX isn't transmitting.
> >
> > Be careful what you wish for.
> >
> > 73 - Steve WB6RSE
> >
> >
> > On Mar 12, 2010, at 7:52 AM, Ken Roberson wrote:
> >
> > Hello all,
> >
> > I would like a macro to program into M3 memory
> > that would take the K3 out of split mode , then
> > send ( UP ) in CW and return to split mode.
> > Would appreciate any help.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

Rick Prather

Re: K3 Need_Macro_Help

In reply to this post by K5DNL

A joke, right?

Rick
K6LE

On 3/12/2010, at 7:52 , Ken Roberson wrote:

> Hello all,
>
> I would like a macro to program into M3 memory
> that would take the K3 out of split mode , then
> send ( UP ) in CW and return to split mode.
> Would appreciate any help.
>
> Thanks 73 Ken K5DNL
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html