Hi, I looked quickly ahead and didn't see an answer so here's my 2cents
worth.
I'm not a STeppIR user, but from reading this and other reflectors, I think
STeppIR make a RS232 "Y" cable that allows the radio on someother divice to
talk while the STeppIR controller only listens, not taking an active part in
the 'conversation'. This allows the logging program to work in that the
logger will ask for frequency information, and the STeppIR controler hears
the request/answer and responds.
Check this out on the STeppIR web site.
...bc nr4c
-----Original Message-----
From:
[hidden email] [mailto:
[hidden email]]
Sent: Friday, November 12, 2010 5:37 PM
To:
[hidden email]
Subject: [Elecraft] K3 P3 and SteppIR controller
Good afternoon to the group. How do I configure the K3, P3 and SteppIR
controller so that the K3 P3 will cause the SteppIR to change bands. Before
the P3 I had no trouble controlling the SteepIR with the K3. 73, Steve
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html