[K3] P3SVGA vs Laptop

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

[K3] P3SVGA vs Laptop

Jim AB3CV
I was looking at adding a SVGA card to my P3 to make it more useful for
RTTY when at FD or other remote activities. But after looking at the price
of laptops I'm thinking of just getting a small one and having it alongside
my K3. I don't have a need for the SVGA otherwise.

It would already have a keyboard, be able to run Elecraft utilities for
quick redoing of any setups like macros or exchanges and also run MMTTY or
similar rather than just depending on the RTTY decoder in the K3.

If I go this way I'll probably try to figure out how to tap the K3 IF and
run the bandscope on the laptop as well. That way I could leave the P3 in
the shack.

The logging functions are already provided elsewhere so this would just be
a RTTY/bandscope/utility rig.

Thoughts?

jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [K3] P3SVGA vs Laptop

Fred Smith-2
Jim

IMHP the most important aspect of the P3 is the SVGA card in the unit. If it
would not have been an option I doubt that the P3 would be on my desk now
small displays just do not cut it any longer.

As far as the laptop for FD it would be easy but you would have extra cost
with it. You would need something LP-PAN and a good soundcard. I use my iPad
with my KX3 for a Panadapter/logger/spotting program also SOTA Watch and GPS
to locate them all. A computer/iPad or any of the other devices work quite
well and small, lightweight.


73,
Fred/N0AZZ
K3 Ser # 6730--KX3 # 2573--K2/100 # 6470-KAT100
P3/SVGA--KPA500--KAT500--W2



-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Jim Miller
Sent: Sunday, July 14, 2013 6:01 PM
To: Elecraft Reflector
Subject: [Elecraft] [K3] P3SVGA vs Laptop

I was looking at adding a SVGA card to my P3 to make it more useful for RTTY
when at FD or other remote activities. But after looking at the price of
laptops I'm thinking of just getting a small one and having it alongside my
K3. I don't have a need for the SVGA otherwise.

It would already have a keyboard, be able to run Elecraft utilities for
quick redoing of any setups like macros or exchanges and also run MMTTY or
similar rather than just depending on the RTTY decoder in the K3.

If I go this way I'll probably try to figure out how to tap the K3 IF and
run the bandscope on the laptop as well. That way I could leave the P3 in
the shack.

The logging functions are already provided elsewhere so this would just be a
RTTY/bandscope/utility rig.

Thoughts?

jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 3204/6490 - Release Date: 07/14/13

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [K3] P3SVGA vs Laptop

haircutter@verizon.net
In reply to this post by Jim AB3CV
As Fred said, "svga is the way to go" I just installed the svga card in my P3 and did the K3 mod for the power connection. Used the setup for the contest last weekend. Was blown away with the ease of moving around and seeing who is there on a big monitor .... Best thing I did..


Don....w2xb
Reply | Threaded
Open this post in threaded view
|

Re: [K3] P3SVGA vs Laptop

ny4g
In reply to this post by Fred Smith-2
I used a KX3 for Field Day with NaP3 Panadapter Display - can display between 48 and 192 Khz of spectrum depending on soundcard - just a laptop and a KX3.

Ariel NY4G

Sent from my iPhone

On Jul 15, 2013, at 4:54 AM, "Fred Smith" <[hidden email]> wrote:

> Jim
>
> IMHP the most important aspect of the P3 is the SVGA card in the unit. If it
> would not have been an option I doubt that the P3 would be on my desk now
> small displays just do not cut it any longer.
>
> As far as the laptop for FD it would be easy but you would have extra cost
> with it. You would need something LP-PAN and a good soundcard. I use my iPad
> with my KX3 for a Panadapter/logger/spotting program also SOTA Watch and GPS
> to locate them all. A computer/iPad or any of the other devices work quite
> well and small, lightweight.
>
>
> 73,
> Fred/N0AZZ
> K3 Ser # 6730--KX3 # 2573--K2/100 # 6470-KAT100
> P3/SVGA--KPA500--KAT500--W2
>
>
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Jim Miller
> Sent: Sunday, July 14, 2013 6:01 PM
> To: Elecraft Reflector
> Subject: [Elecraft] [K3] P3SVGA vs Laptop
>
> I was looking at adding a SVGA card to my P3 to make it more useful for RTTY
> when at FD or other remote activities. But after looking at the price of
> laptops I'm thinking of just getting a small one and having it alongside my
> K3. I don't have a need for the SVGA otherwise.
>
> It would already have a keyboard, be able to run Elecraft utilities for
> quick redoing of any setups like macros or exchanges and also run MMTTY or
> similar rather than just depending on the RTTY decoder in the K3.
>
> If I go this way I'll probably try to figure out how to tap the K3 IF and
> run the bandscope on the laptop as well. That way I could leave the P3 in
> the shack.
>
> The logging functions are already provided elsewhere so this would just be a
> RTTY/bandscope/utility rig.
>
> Thoughts?
>
> jim ab3cv
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2904 / Virus Database: 3204/6490 - Release Date: 07/14/13
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: [K3] P3SVGA vs Laptop

Jim AB3CV
In reply to this post by Fred Smith-2
Thanks all for feedback.

Jim ab3cv
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html