(K3) Programmers code

[ARRL - N6MQL]

Does anyone know the programmers reference code that I should send to
the RS232 in order to key the rig in CW mode.  DM780 is capable of
sending CW without using a WinKey or other external device. I would like
to know what command is being sent to do that.  Thank you Feel free to
email direct if you like.

--
Michael Aretsky
N6MQL

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Joe Subich, W4TV-4]

See the Programmer's Reference:
    http://www.elecraft.com/manual/K3_Pgmrs_Reference_Rev_C14.pdf

and read the information on the KY; command.

73,

    ... Joe, W4TV


On 7/14/2011 8:20 PM, N6MQL wrote:
> Does anyone know the programmers reference code that I should send to
> the RS232 in order to key the rig in CW mode.  DM780 is capable of
> sending CW without using a WinKey or other external device. I would like
> to know what command is being sent to do that.  Thank you Feel free to
> email direct if you like.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

  If you look at the K3 Programmer's Reference, you will find the "KY"
command.
The information in that manual will give you the syntax and other info
you need to know.

Unless you are writing your own software, I suggest that you try it from
the K3 Utility terminal window.

73,
Don W3FPR

On 7/14/2011 8:20 PM, N6MQL wrote:
> Does anyone know the programmers reference code that I should send to
> the RS232 in order to key the rig in CW mode.  DM780 is capable of
> sending CW without using a WinKey or other external device. I would like
> to know what command is being sent to do that.  Thank you Feel free to
> email direct if you like.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html