K3 Quick Start uploaded

[Eric Swartz - WA6HHQ]

We have just placed the K3 Quick Start sheet on our K3 page at
http://www.elecraft.com

You can access it directly at:
http://www.elecraft.com/K3/K3quickstart_web.pdf

(Its a 1.2 MB pdf.)

73, Eric  WA6HHQ

--

_..._

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[M0XDF]

Guess we are all reading it, gone very quiet here :-)

I still don't understand how one gets/installs the 'Aux RF' socket?


On 19/9/07 20:55, "Eric Swartz - WA6HHQ Elecraft" <[hidden email]> sent:

> We have just placed the K3 Quick Start sheet on our K3 page at
> http://www.elecraft.com
>
> You can access it directly at:
> http://www.elecraft.com/K3/K3quickstart_web.pdf
>
> (Its a 1.2 MB pdf.)
>
> 73, Eric  WA6HHQ

--
Write the bad things that are done to you in the sand, but write the
good things that happen to you on a piece of marble. -Arabian wisdom


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[M0XDF]

This is unbearable, did you have to do that?


Now it's even harder to wait!
HiHi


On 19/9/07 20:55, "Eric Swartz - WA6HHQ Elecraft" <[hidden email]> sent:

> We have just placed the K3 Quick Start sheet on our K3 page at
> http://www.elecraft.com
>
> You can access it directly at:
> http://www.elecraft.com/K3/K3quickstart_web.pdf
>
> (Its a 1.2 MB pdf.)
>
> 73, Eric  WA6HHQ

--
The problem with being sure that God is on your side is that you can't
change your mind, because God sure isn't going to change His. -Roger Ebert,
film-critic (1942- )


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Ed Muns, W0YK]

> I still don't understand how one gets/installs the 'Aux RF' socket?

Currently, this location has a hole plug, reserving it for future use, most
likely sometime after initial shipments.  Meanwhile, a standard panel-mount
BNC could be installed by the user with a ground lug, lockwasher and nut.
One use for Aux RF would be to wire a mini-coax from it to a TMP plug that
would mate with the auxiliary input on the KRX3.  Normally, the KRX3
auxiliary input is connected to the KAT3 assembly so it can be switched in
as described in the Antenna Switching PDF posted on the K3 web site.  But,
if one does not have the KAT3, or wants to use the KRX3 auxiliary input in a
different way, then this alternative is available to them.

73,
Ed - W0YK

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com