Elecraft

K3 Split Rtty ops?

Classic

List

Threaded

7 messages Options

CX7TT

K3 Split Rtty ops?

Today, PZ5TT was on 17 RTTY working split...I set up to accomodate 3 up
but when trying to send with my paddle, it would not key the rig nor
transmit. My 'workaround' was to use the A/B switch and work my timing
so he would see my 'print'....have I missed something? When using VFO B,
I cant use the paddle to send RTTY? I have also found that after
finishing keying with the paddle, the diddle continues for about 3 sec
unless I tap XMIT to immediately stop...
73
Tom
CX7TT
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Greg - AB7R

Re: K3 Split Rtty ops?

Split FSK-D from the paddles is a bug that Wayne has on the list to fix.

The diddle prior to crossing over to RX is 4 seconds. If using your paddle you
send IM as a prosign just like you would send SK it will stop TX. Also, if you
save CW messages and end them with the IM prosign they will not send the prosign in
CW but it will switch to RX at the end without the 4 second delay.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065

On Wed Nov 26 14:59 , TMorton sent:

>Today, PZ5TT was on 17 RTTY working split...I set up to accomodate 3 up
>but when trying to send with my paddle, it would not key the rig nor
>transmit. My 'workaround' was to use the A/B switch and work my timing
>so he would see my 'print'....have I missed something? When using VFO B,
>I cant use the paddle to send RTTY? I have also found that after
>finishing keying with the paddle, the diddle continues for about 3 sec
>unless I tap XMIT to immediately stop...
>73
>Tom
>CX7TT
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Ed Muns, W0YK

RE: K3 Split Rtty ops?

In reply to this post by CX7TT

> Today, PZ5TT was on 17 RTTY working split...I set up to
> accomodate 3 up but when trying to send with my paddle, it
> would not key the rig nor transmit. My 'workaround' was to
> use the A/B switch and work my timing so he would see my
> 'print'....have I missed something? When using VFO B, I cant
> use the paddle to send RTTY?

This was fixed in MCU 2.60. Here is an excerpt from the release notes
document:

MCU 2.60 / DSP 1.94, 10-29-2008

* SPLIT operation is now allowed in FSK-D, PSK-D, and CW-in-SSB modes.

Ed

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Joe Subich, W4TV-3

RE: K3 Split Rtty ops?

Ed,

> This was fixed in MCU 2.60. Here is an excerpt from the release notes
> document:
>
> MCU 2.60 / DSP 1.94, 10-29-2008

That's not in the public code line and does not work with the
public beta (MCU 2.67 / DSP 1.96, 1118-2008).

73,

... Joe, W4TV

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Ed Muns
> Sent: Wednesday, November 26, 2008 6:35 PM
> To: 'TMorton'
> Cc: [hidden email]
> Subject: RE: [Elecraft] K3 Split Rtty ops?
>
>
> > Today, PZ5TT was on 17 RTTY working split...I set up to
> > accomodate 3 up but when trying to send with my paddle, it
> > would not key the rig nor transmit. My 'workaround' was to
> > use the A/B switch and work my timing so he would see my
> > 'print'....have I missed something? When using VFO B, I cant
> > use the paddle to send RTTY?
>
> This was fixed in MCU 2.60. Here is an excerpt from the release notes
> document:
>
> MCU 2.60 / DSP 1.94, 10-29-2008
>
> * SPLIT operation is now allowed in FSK-D, PSK-D, and CW-in-SSB modes.
>
> Ed
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

KK7P

Re: K3 Split Rtty ops?

>> This was fixed in MCU 2.60. Here is an excerpt from the release notes
>> document:
>>
>> MCU 2.60 / DSP 1.94, 10-29-2008
>
> That's not in the public code line and does not work with the
> public beta (MCU 2.67 / DSP 1.96, 1118-2008).

The notes in the public beta under 2.63/1.95 indicate

* SPLIT COMBINATIONS AVAILABLE: Cross-mode SPLIT operation is possible
with any combination of CW and SSB for VFO A and B. Same-mode SPLIT is
possible in all modes except PSK-D.

I just tested this in my current development code, MCU 2.70, DSP 1.98
and verified FSK-D works in split while PSK-D does not, confirming this
note.

--

Often field test code releases get rolled up into public beta releases,
so the 2.60 features, while not listed separately, are included (unless
the feature doesn't work, of course :-)

73 and Happy Thanksgiving,

Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Greg - AB7R

RE: K3 Split Rtty ops?

In reply to this post by Ed Muns, W0YK

There goes my darn memory again!! I thought this was fixed but for some
reason I thought I tried it some time ago and it was not working. Must have
been before 2.60.

Sorry for the confusion!

73
Greg
AB7R

-----Original Message-----
From: Ed Muns [mailto:[hidden email]]
Sent: Wednesday, November 26, 2008 3:35 PM
To: 'TMorton'
Cc: [hidden email]; 'Greg - AB7R'
Subject: RE: [Elecraft] K3 Split Rtty ops?

> Today, PZ5TT was on 17 RTTY working split...I set up to
> accomodate 3 up but when trying to send with my paddle, it
> would not key the rig nor transmit. My 'workaround' was to
> use the A/B switch and work my timing so he would see my
> 'print'....have I missed something? When using VFO B, I cant
> use the paddle to send RTTY?

This was fixed in MCU 2.60. Here is an excerpt from the release notes
document:

MCU 2.60 / DSP 1.94, 10-29-2008

* SPLIT operation is now allowed in FSK-D, PSK-D, and CW-in-SSB modes.

Ed

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Joe Subich, W4TV-3

RE: K3 Split Rtty ops?

In reply to this post by KK7P

> * SPLIT COMBINATIONS AVAILABLE: Cross-mode SPLIT operation is
> possible with any combination of CW and SSB for VFO A and B.
> Same-mode SPLIT is possible in all modes except PSK-D.

Well, CW in Voice does not work with both VFOs in SSB and
split selected for me in 2.67. That's what I was using to
check Ed's report. I have never been able to make "CW in
Voice" work when split.

73,

... Joe, W4TV

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Lyle Johnson
> Sent: Wednesday, November 26, 2008 8:02 PM
> To: [hidden email]
> Cc: [hidden email]; 'TMorton'
> Subject: Re: [Elecraft] K3 Split Rtty ops?
>
>
> >> This was fixed in MCU 2.60. Here is an excerpt from the release
> >> notes
> >> document:
> >>
> >> MCU 2.60 / DSP 1.94, 10-29-2008
> >
> > That's not in the public code line and does not work with the
> > public beta (MCU 2.67 / DSP 1.96, 1118-2008).
>
> The notes in the public beta under 2.63/1.95 indicate
>
> * SPLIT COMBINATIONS AVAILABLE: Cross-mode SPLIT operation is
> possible with any combination of CW and SSB for VFO A and B.
> Same-mode SPLIT is possible in all modes except PSK-D.
>
> I just tested this in my current development code, MCU 2.70,
> DSP 1.98
> and verified FSK-D works in split while PSK-D does not,
> confirming this
> note.
>
> --
>
> Often field test code releases get rolled up into public beta
> releases,
> so the 2.60 features, while not listed separately, are
> included (unless
> the feature doesn't work, of course :-)
>
>
> 73 and Happy Thanksgiving,
>
> Lyle KK7P
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com