Elecraft › [K3]

K3 Sub Receiver forces FSK D to AFSK A

Classic

List

Threaded

5 messages Options

Bud Governale, W3LL

K3 Sub Receiver forces FSK D to AFSK A

I've always used FSK D mode.

Since updating to 3.57 when I turn on the Sub Receiver the radio goes into AFSK A.

How do I stop the SUB from changing FSK D to AFSK A?

In the past the radio was always in FSK D and the SUB did not change this.

I'm in VFO A and check DATA MD. It says FSK D.

Turn on SUB and check DATA MD it now says AFSK A.

Thanks,

Bud W3LL
[hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Mark n2qt

TX/RX on vfo B with SUB rx?

Is it possible to use vfo B to set both the tx and rx freq? I've got an
idea about
using the IF output for mult. searching, which would require using VFO B to
set tx/rx using the sub rx. Alternately can I get to the IF output from
the SUB RX?

Mark n2qt

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Joe Subich, W4TV-4

Re: K3 Sub Receiver forces FSK D to AFSK A

In reply to this post by Bud Governale, W3LL

I've noticed the same sub-mode change in data modes but had
not tracked it down to the subreceiver (I thought I had a
bad macro in my logging software). However, now that Bud
has posted this, I can confirm the (bad) behavior as due to
turning on the subreceiver - even if I have tapped A -> B
twice to set all parameters on both VFOs the same. .

73,

... Joe, W4TV

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Bud
> Governale, W3LL
> Sent: Thursday, November 12, 2009 4:53 PM
> To: [hidden email]
> Subject: [Elecraft] K3 Sub Receiver forces FSK D to AFSK A
>
>
> I've always used FSK D mode.
>
> Since updating to 3.57 when I turn on the Sub Receiver the
> radio goes into AFSK A.
>
> How do I stop the SUB from changing FSK D to AFSK A?
>
> In the past the radio was always in FSK D and the SUB did not
> change this.
>
> I'm in VFO A and check DATA MD. It says FSK D.
>
> Turn on SUB and check DATA MD it now says AFSK A.
>
> Thanks,
>
> Bud W3LL
> [hidden email]
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

wayne burdick

Re: K3 Sub Receiver forces FSK D to AFSK A

Administrator

----
http://www.elecraft.com

On Nov 12, 2009, at 2:30 PM, "Joe Subich, W4TV" <[hidden email]>
wrote:

>
> I've noticed the same sub-mode change in data modes but had
> not tracked it down to the subreceiver (I thought I had a
> bad macro in my logging software). However, now that Bud
> has posted this, I can confirm the (bad) behavior as due to
> turning on the subreceiver - even if I have tapped A -> B
> twice to set all parameters on both VFOs the same. .
>
> 73,
>
> ... Joe, W4TV
>
>
>
>> -----Original Message-----
>> From: [hidden email]
>> [mailto:[hidden email]] On Behalf Of Bud
>> Governale, W3LL
>> Sent: Thursday, November 12, 2009 4:53 PM
>> To: [hidden email]
>> Subject: [Elecraft] K3 Sub Receiver forces FSK D to AFSK A
>>
>>
>> I've always used FSK D mode.
>>
>> Since updating to 3.57 when I turn on the Sub Receiver the
>> radio goes into AFSK A.
>>
>> How do I stop the SUB from changing FSK D to AFSK A?
>>
>> In the past the radio was always in FSK D and the SUB did not
>> change this.
>>
>> I'm in VFO A and check DATA MD. It says FSK D.
>>
>> Turn on SUB and check DATA MD it now says AFSK A.
>>
>> Thanks,
>>
>> Bud W3LL
>> [hidden email]
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

wayne burdick

Re: K3 Sub Receiver forces FSK D to AFSK A

Administrator

In reply to this post by Joe Subich, W4TV-4

I've already fixed this for the next release.

Tnx
Wayne
N6KR

----
http://www.elecraft.com

On Nov 12, 2009, at 2:30 PM, "Joe Subich, W4TV" <[hidden email]>
wrote: