K3 TXEQ

[Bob Wehking]

I am using a Heil Gold Line microphone with a HC4 & a HC5 cartridge.
Does anybody have TX EQ setting that they have used with these mic
cartridges. I know that EQ needs to be tailored for one's actual voice.
 
Bob
WB8DDI
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Arie Kleingeld PA3A-2]

Well,

I wouldn't tailor anything with such cartridges.
The HC4 and 5 are carefully tailored already by Heil. That's one of the
reasons why people by them.

73 and HNY

Arie PA3A





-----Oorspronkelijk bericht-----
 
Onderwerp: [Elecraft] K3 TXEQ

I am using a Heil Gold Line microphone with a HC4 & a HC5 cartridge.
Does anybody have TX EQ setting that they have used with these mic
cartridges. I know that EQ needs to be tailored for one's actual voice.
 
Bob
WB8DDI
 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Ralph]

This was explained to me recently by an audio engineer.  We don't want to
waste energy transmitting sounds below about 300Hz.  It's ALL wasted energy
and it conveys no intelligibility.  There's a lot of "trash" below 300Hz,
room noise, fan noise and breath pops etc. The recommendation is to set the
first two TX EQ octave bands (50Hz and 100Hz) for maximum cut @ -16dB and
set all the other bands flat @ 0dB.  It works FB for me.  The reports
are good.

Ralph K1ZZI

Date: Thu, 31 Dec 2009 11:43:18 -0500
From: "Bob Wehking" <[hidden email]>
Subject: [Elecraft] K3 TXEQ

I am using a Heil Gold Line microphone with a HC4 & a HC5 cartridge.
Does anybody have TX EQ setting that they have used with these mic
cartridges. I know that EQ needs to be tailored for one's actual voice.

Bob
WB8DDI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Julian, G4ILO]

Arie Kleingeld PA3A-2 wrote

I wouldn't tailor anything with such cartridges.
The HC4 and 5 are carefully tailored already by Heil. That's one of the
reasons why people by them.

But Heil themselves state: "To achieve maximum audio quality it is important to adjust the DSP settings of your transmitter when using Heil microphones." ( http://www.heilsound.com/amateur/settings/index.htm )