Elecraft

K3 USB-->Serial Names OT, Kinda

Classic

List

Threaded

4 messages Options

James Bennett

K3 USB-->Serial Names OT, Kinda

Hi folks,

Looking for some help identifying the USB—>Serial adapter names on Windows 8.1. Here’s the situation: I have a KX3 and a K3. Each has it’s own USB—>Serial adapter from Elecraft. These USB guys plug into my iMac. I run the K3 on the Mac side of the machine, and the KX3 under VMWare Fusion and Windows 8.1 on “the other side”. On the Mac side I use MacLogger DX (MLDX), FLDIGI, and WSJT-X. When I configure the radio connection, MLDX knows the “names” of each adapter. the one for the K3 is A8003Ssu and the KX3’s adapter is A501XNHZ. On the Mac side, it is easy to determine which adapter is associated with which radio.

However, on the Windows side, it is not an easy matter at all. Nowhere can I find any place where it shows the names of these two adapters. And the reason why it is a problem is thus: If the K3 is not “connected” to either MLDX, or WSJT-X, or FLDIGI on the Mac side and I bring up Windows, I often get both adapters available to me under Fusion. If I attach the wrong one to my apps on the Windows side, things are ugly and take a while to correct.

Is there some way, either with Windows itself, or with VMWare Fusion to see these device names?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Fred Townsend-2

Re: K3 USB-->Serial Names OT, Kinda

Have you looked in Windows 'Device Manager'?

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of James Bennett
Sent: Wednesday, January 28, 2015 8:32 PM
To: Elecraft Reflector Reflector
Subject: [Elecraft] K3 USB-->Serial Names OT, Kinda

Hi folks,

Looking for some help identifying the USB—>Serial adapter names on Windows 8.1. Here’s the situation: I have a KX3 and a K3. Each has it’s own USB—>Serial adapter from Elecraft. These USB guys plug into my iMac. I run the K3 on the Mac side of the machine, and the KX3 under VMWare Fusion and Windows 8.1 on “the other side”. On the Mac side I use MacLogger DX (MLDX), FLDIGI, and WSJT-X. When I configure the radio connection, MLDX knows the “names” of each adapter. the one for the K3 is A8003Ssu and the KX3’s adapter is A501XNHZ. On the Mac side, it is easy to determine which adapter is associated with which radio.

However, on the Windows side, it is not an easy matter at all. Nowhere can I find any place where it shows the names of these two adapters. And the reason why it is a problem is thus: If the K3 is not “connected” to either MLDX, or WSJT-X, or FLDIGI on the Mac side and I bring up Windows, I often get both adapters available to me under Fusion. If I attach the wrong one to my apps on the Windows side, things are ugly and take a while to correct.

Is there some way, either with Windows itself, or with VMWare Fusion to see these device names?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

James Bennett

Re: K3 USB-->Serial Names OT, Kinda

Yep, sure did. And I don’t find those names anywhere. Only “generic” USB serial adapter nomenclature.

> On Wednesday, Jan 28, 2015, at Wednesday, 9:16 PM, Fred Townsend <[hidden email]> wrote:
>
> Have you looked in Windows 'Device Manager'?
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email] <mailto:[hidden email]>] On Behalf Of James Bennett
> Sent: Wednesday, January 28, 2015 8:32 PM
> To: Elecraft Reflector Reflector
> Subject: [Elecraft] K3 USB-->Serial Names OT, Kinda
>
> Hi folks,
>
> Looking for some help identifying the USB—>Serial adapter names on Windows 8.1. Here’s the situation: I have a KX3 and a K3. Each has it’s own USB—>Serial adapter from Elecraft. These USB guys plug into my iMac. I run the K3 on the Mac side of the machine, and the KX3 under VMWare Fusion and Windows 8.1 on “the other side”. On the Mac side I use MacLogger DX (MLDX), FLDIGI, and WSJT-X. When I configure the radio connection, MLDX knows the “names” of each adapter. the one for the K3 is A8003Ssu and the KX3’s adapter is A501XNHZ. On the Mac side, it is easy to determine which adapter is associated with which radio.
>
> However, on the Windows side, it is not an easy matter at all. Nowhere can I find any place where it shows the names of these two adapters. And the reason why it is a problem is thus: If the K3 is not “connected” to either MLDX, or WSJT-X, or FLDIGI on the Mac side and I bring up Windows, I often get both adapters available to me under Fusion. If I attach the wrong one to my apps on the Windows side, things are ugly and take a while to correct.
>
> Is there some way, either with Windows itself, or with VMWare Fusion to see these device names?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html> Message delivered to [hidden email] <mailto:[hidden email]>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

James Bennett

Re: K3 USB-->Serial Names OT, Kinda

In reply to this post by James Bennett

Yep, both of ‘em are there in the Device Manager. The K3 is Com1 (not connected to the Windoze guest) and the KX3 is COM3, which IS connected to Windoze. Unfortunately, neither of them show the nice human-friendly names as I’d hoped they would. And, Fusion’s name doesn’t help, either. Clicking each of the two USB icons on the Fusion toolbar simply shows “Future Devices FT232R USB UART”. I knew that the KX3 is COM3, as I use LP Bridge and it shows the COM port the radio is connected to. Oh well, would have been nice to see the human names, but I guess the Microsoft folks didn’t think it was necessary.

Thanks folks, 73

> On Thursday, Jan 29, 2015, at Thursday, 4:53 AM, Mike Reublin NF4L <[hidden email]> wrote:
>
> On the Windoze side, the ports will show up in Device Manager under Ports(Com & LPT) as COMx where x is some number. To figure out which is which, unplug one and see which COM goes away.
> If you don't have the Ports listing in Device Manager, WIn isn't seeing them. I run Win 7 under Parallels, and if I want to use the adapters in Windoze, I have to connect them in Parallels. They cannot be available to the Mac and Win at the same time. I have no idea about Fusion, it may work differently.
>
> 73, Mike NF4L
>
>> On Jan 28, 2015, at 11:31 PM, James Bennett <[hidden email] <mailto:[hidden email]>> wrote:
>>
>> Hi folks,
>>
>> Looking for some help identifying the USB—>Serial adapter names on Windows 8.1. Here’s the situation: I have a KX3 and a K3. Each has it’s own USB—>Serial adapter from Elecraft. These USB guys plug into my iMac. I run the K3 on the Mac side of the machine, and the KX3 under VMWare Fusion and Windows 8.1 on “the other side”. On the Mac side I use MacLogger DX (MLDX), FLDIGI, and WSJT-X. When I configure the radio connection, MLDX knows the “names” of each adapter. the one for the K3 is A8003Ssu and the KX3’s adapter is A501XNHZ. On the Mac side, it is easy to determine which adapter is associated with which radio.
>>
>> However, on the Windows side, it is not an easy matter at all. Nowhere can I find any place where it shows the names of these two adapters. And the reason why it is a problem is thus: If the K3 is not “connected” to either MLDX, or WSJT-X, or FLDIGI on the Mac side and I bring up Windows, I often get both adapters available to me under Fusion. If I attach the wrong one to my apps on the Windows side, things are ugly and take a while to correct.
>>
>> Is there some way, either with Windows itself, or with VMWare Fusion to see these device names?
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email] <mailto:[hidden email]>