Just spoke to VK4FW at T2T. One of their K3's works on CW but has died
on SSB. Bill says they disconnected all cables, set all settings to match another K3 that is working on SSB, checked the microphone routing on the Main Menu and of course swapped out headsets. No joy. They are frantic to get it working and are at this moment on 24945 SSB listening 5 up. If any of the Brain Trust can help, please do. It's 2026Z. Garry, NI6t ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
I called them and worked them but was unable to make a suggestion to them that they
download the same configuration file as used by the other K3, and re-start it. Maybe they have already tried this, I don't know. VY 73, Lance On 11/14/2011 8:27 PM, Garry Shapiro wrote: > Just spoke to VK4FW at T2T. One of their K3's works on CW but has died > on SSB. Bill says they disconnected all cables, set all settings to > match another K3 that is working on SSB, checked the microphone routing > on the Main Menu and of course swapped out headsets. No joy. They are > frantic to get it working and are at this moment on 24945 SSB listening > 5 up. If any of the Brain Trust can help, please do. It's 2026Z. > > Garry, NI6t > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- Lance Collister, W7GJ (ex WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX, 3D2LR, 5W0GJ) P.O. Box 73 Frenchtown, MT 59834-0073 USA TEL: (406) 626-5728 QTH: DN27ub URL: http://www.bigskyspaces.com/w7gj Windows Messenger: [hidden email] Skype: lanceW7GJ 2m DXCC #11/6m DXCC #815 Interested in 6m EME? Ask me about subscribing to the Magic Band EME email group, or just fill in the request box at the bottom of my web page (above)! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
In reply to this post by Garry Shapiro
Garry,
I am not at home right. Using another radio's config file will probably not work as the calibrations would be different between the two rigs. If you can get them on the air or by email I would suggest doing the EEINIT process and then redo the calibrations outlined in the manual (watt meter, TX Gain, VCO CAL and Ref CAL). It should not take them more than 15-20 min. They will also have to resetup their filter settings and activate whatever options they have in the CONFIG menu. No guarantee this will work but considering the urgency it is probably the first best bet to try. 73 Greg AB7R On Mon, Nov 14, 2011 at 12:27 PM, Garry Shapiro <[hidden email]> wrote: > Just spoke to VK4FW at T2T. One of their K3's works on CW but has died > on SSB. Bill says they disconnected all cables, set all settings to > match another K3 that is working on SSB, checked the microphone routing > on the Main Menu and of course swapped out headsets. No joy. They are > frantic to get it working and are at this moment on 24945 SSB listening > 5 up. If any of the Brain Trust can help, please do. It's 2026Z. > > Garry, NI6t > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Administrator
|
If they are using a condenser mic, make sure the mic boas is turned on.
73, Eric --- www.elecraft.com On 11/14/2011 1:02 PM, Greg wrote: > Garry, > > I am not at home right. Using another radio's config file will probably > not work as the calibrations would be different between the two rigs. > > If you can get them on the air or by email I would suggest doing the EEINIT > process and then redo the calibrations outlined in the manual (watt meter, > TX Gain, VCO CAL and Ref CAL). It should not take them more than 15-20 > min. They will also have to resetup their filter settings and activate > whatever options they have in the CONFIG menu. > > No guarantee this will work but considering the urgency it is probably the > first best bet to try. > > 73 > Greg > AB7R > > > > On Mon, Nov 14, 2011 at 12:27 PM, Garry Shapiro<[hidden email]> wrote: > >> Just spoke to VK4FW at T2T. One of their K3's works on CW but has died >> on SSB. Bill says they disconnected all cables, set all settings to >> match another K3 that is working on SSB, checked the microphone routing >> on the Main Menu and of course swapped out headsets. No joy. They are >> frantic to get it working and are at this moment on 24945 SSB listening >> 5 up. If any of the Brain Trust can help, please do. It's 2026Z. >> >> Garry, NI6t >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Administrator
|
bias...
--- www.elecraft.com On 11/14/2011 1:07 PM, Eric Swartz - WA6HHQ, Elecraft wrote: > If they are using a condenser mic, make sure the mic boas is turned on. > > 73, Eric > > --- > www.elecraft.com > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
Free forum by Nabble | Edit this page |